Okay I did a little research on the RHO and here's what I came up with. It came with a b-303 cam instead of a stock cam and they also did some porting to the exhaust side of the stock heads. The one they dyno'd came in at 244hp and 296lbs-ft or torque at the flywheel. Of course results will very depending on the intake and exhaust set up. That was a carb set up that they dyno'd.
-Ryan
__________________
89GT,Pro-Bullet 306, H/C/I and a bunch of other stuff. * Sold*
00GT, Vortech S-Trim, Steeda Boost Pipe, C&L intake, Mac off-road H-pipe, Flowmasters, B&M Ripper shifter, Eibach Sportline springs, Koni Struts/shocks, MM full length subframe connectors, Cobra brakes, 3.73's.
My Car Domain Page
|