MustangWorks.com : Ford Forums - View Single Post

HISSIN50 · 05-01-2004, 07:41 PM

try to find a shop that will use a Blanchard grinder to turn the flywheel.
you want to keep the same geometry between the friction surface and the center hub.

05-01-2004, 07:41 PM	#5
HISSIN50 Registered Member Join Date: Mar 2004 Posts: 62	try to find a shop that will use a Blanchard grinder to turn the flywheel. you want to keep the same geometry between the friction surface and the center hub.