Dont get blinded by all this 86 flat top piston stuff. I personally have been working on a 86 shortblock with TFS TW heads and a custom cam done by FTI. Specs are in the 228* .540 area. Dont worry about lift, max lift happens after TDC. The cam events is what your after. IT MUST BE CLAYED.
TFS TW Heads
Track Heat-Performer Intake
Custom Cam- you can find an off the shelf too.
70mm TB
24# Injectors
Adj. Regulator
MAF Conversion w/75 Bullet
1.6 Rockers
3500 stall converter
4.10 gears
275/50-15 DR or 26x10 tire
Megabite Jr Lower control arms
HPM Uppers
190 intank pump
This should get you started.
You should be in the low 12s
__________________
347- 10.63@128 N/A
|