The carb studs should be replaceable? Dont they screw into the intake? you should be able to just replace it with a new carb stud found in parts stores (they usually come in sets of 4).
Not shure about the other air bubbles, but if you have a loose stud, thats not good cause it could leak. They all have to be tight.
I dont think glue will hold it. It has to torque down.
__________________
5.0, Holley heads, 1.7 Scorp Rockers, Stealth intake, Holley 600 carb, Holley Mech. Fuel pump, MSD 6Digital, MSD distributor, Hotchkis upper/lower rear control arms, FMS B Springs, 3:73 (8.8) rear.
Production # 9,377
|