Well...I just tried to remove the lower control arms and I can't remove the bolts once the nuts are off. I tried wacking the end of the bolt with a hammer and it still wouldn't slide out.
Getting the nuts loose wasn't that hard....it's getting the bolts out.
Another thing.....I noticed a LOT of play in the upper control arms. Should they be like that? I can grab an end and wiggle it all around.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.
|