[Hozer 88GTConv]

Now that I have finally solved the major oil consumption issue of a poor seal on the intake manifold, I noticed a decent amount of oil in a new plastic fuel filter I installed between my PCV valve and the vacuum port underneath the intake manifold.

I definitely have a baffle in the intake manifold and I am convinced way too much oil is being sucked into the intake. I already lengthened the 3/8" hose by two feet to make the oil travel farther, but it is still getting drawn into the manifold.

Any tips? I currently have only one oil breather on the passenger bank valve cover. I don't want to plug the system either, I've read it's too important to vent.

Thanks...