WC T-5 input shaft bearing
WC T-5 part number 1352 249. The trans wouldnt shift into second or reverse and grinding into 3rd. Tranny is supposedly brand new. Took the trans apart to find out what i was going to need, gears, syncro's. Well, when i took the input shaft out, A bearing was ground up. It is the bearing inbetween the input shaft and the output shaft. The syncro's were fine, gears were fine. The syncros were not chewed up. I have already cleaned the case, countershaft, and what i could of the output shaft. I was unable to remove 5th gear. Did some minor clean up. It doesnt look like i need to replace anything other than the bearing i mentioned. Anyone know where i can get just that bearing?
__________________
1983 mustang, 393 cubic inch stroker small block, victor jr heads and intake, gold race 1.6 roller rockers. comp cam 304, 244@ .050. .576" hydralic retro roller cam,lunati rods. block was o-ringed,10:1 forged pistons, speed pro fit fit rings, clevite bearings,msd distributor and igniton,be cool huge radiator, black lite electric fan, march underdrive pulleys, mildon deep sump oil pan, mac 1 3.4" long tube headers, 3" dr gas x-pipe and mac exhaust,ARP bolts. car weighs 2900 lbs w/out driver, sub frames, weld wheels, mickey thompson sportsman pro 26 x 10.5 x 15's,#8 fuel line steel braided
|