Will this COMBO run me 11's from running 14.20??
OK... I have a 91 Mustang GT. The following mods is the configuration I ran with running a 14.29@95
-Auto with a Shift Kit (stock stall converter)
-Aluminum Drive Shaft
-4.10 Gears
-New POSI
-Hoosier Quicktime PRO 27x10.5x15
-Electric Fan
-No-Cats' 2 1/2 H-Pipe
-2 1/2 Flowmasters with 2 1/2 tailpipes
-Removed Smog pump and got short belt
-Jegs brand adjust. upper and lower control
arms adjusted to stock length. (metal bushings everwhere except poly. at upper control arm at the axle)
-Sub Frame Connectors (bolted on at this point)
-Back Seats removed and some rear sound deading
Everything else is stock on the car... It has nearly all options including a/c. Everything is still in place except for the rear seats so it should be close to stock weight.
What I want to know what HEADS/INTAKE/CAM/INJECTORS/THROTTLE BODY/MAF/HEADERS/TRANS MOD. (i want to keep my shortblock the same!!) that I will need to run high 11's. People say its possible with just those mods. Please let me know what you would suggest to acheive this if what i have listed below if a BUNCH OF BULL.
What was suggested to me was Trickflow Alum Twist Wedge 2.02 STAGE 2 PORTED (possibly milled to increase compression). Trickflow TRACK HEAT intake (box stock). Stage 2 Trickflow cam, 24lb (maybe 30) injectors. 75mm TB and 80mm MAF. Suggested also was a C4 trans. with a 3000 stall converter. I'm planning on getting long tube 1 5.8- 1 3/4 headers with 3 inch collectors. What do you think this would get me in the 11s in the 1/4? I know I'll need a roll cage running 11's so i'm excited. For once I will have the money!! I want to do this without any power adders, all motor!!! PLEASE HELP :-)
------------------
Joe Zemaitis
Grand Rapids Michigan
|