Re: Dropin the Tranny
Quote:
|
Originally Posted by Ieatcamaros
You have to use a boxed-end wrench or a 12pt socket. I'm pretty sure it is a 1/2". And be prepared for the little bit of transmission fluid that will come out of the transmission when you remove the driveshaft.
|
the DS bolts are 12 point 12mm.
You might need to use a little heat and a hammer to bust them loose.
__________________
NMRA O/C 9516
NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft
|