Re: O2 sensor help...
Quote:
|
Originally Posted by Hozer 88GTConv
Joel,
tx for the reply. Do you have a link to the pcm harness schematic? I am trying to find one now online and in my references...
found it, looks like pin 49 ego ground
43 ego l
29 ego r
I'll be looking for a 5.5vdc-ish signal at the computer.
tx
|
Yup....those are the pins. Don't forget to do the scan though. GL
__________________
ACRONYMS:
LUK=Let Us Know, GL=Good Luck, LMK=Let Me Know, JIC=Just In Case, BTSTDTRT=Been There Seen That Done That Repaired That and the classic... DILLIGAS=Do I Look Like I Give A S***
1986 Mustang GT w/T-Tops 
NOW: 5.0L Stock SB, X303 Cam, 700 cfm DP Holley, 289 '66 Heads, 1.7 RR, Richmond Gear 4+1 Tranny, Centerforce DF, 2.73 Gears
WIP: 3.90 Gears, LS Overhaul, Adj. LCA's & UCA's (Granatelli), T-Top weather striping and rear braces bodywork 
|