MustangWorks.com : Ford Forums - View Single Post

John · 09-29-2001, 07:30 AM

I dont think that not doing donuts is a problem

. My gears were installed a year ago, and I to rebuilt posi and new bearings. @ the track my ride will start to get sideways on burnout, but then driver side tire stops spinning. On the street both tires will fry till they die. You gotta remember the track is a super sticky surface. I am planning on rebuilding my posi again, but this time I'm gonna do it myself and use extra discs (couple of the old ones).John Oh BTW not to rag or anything but mid 14 w/ your mods seems slow to me. My coupe ran a 14.03 w/out cam intake & head work on a stock stall AOD and its a full weight car.

------------------
89 Notch: ASP Pullies,
K&N Air,Transgo shiftkit,Trans. cooler,FMS 3 core , FMS 4:10's, 1.5" cowl, cold air kit, hooker shorties(jet hot coated), O/R H-Pipe, ASP solid mounts, Energy Sus. Trans. Mnt. BBK 70mm TB, MSD 6al, Dual elec. fans, 5.0 Firepower Kit, Scorpion 1.6 RR's, Flowmasters, 73 mm MAF, cobra intake(ported), 1" phenolic spacer,ported stock heads and crower #512 cam.

[This message has been edited by John (edited 09-29-2001).]

09-29-2001, 07:30 AM	#2
John Registered Member Join Date: Dec 1998 Location: Ft.Myers, FL. Posts: 150	I dont think that not doing donuts is a problem . My gears were installed a year ago, and I to rebuilt posi and new bearings. @ the track my ride will start to get sideways on burnout, but then driver side tire stops spinning. On the street both tires will fry till they die. You gotta remember the track is a super sticky surface. I am planning on rebuilding my posi again, but this time I'm gonna do it myself and use extra discs (couple of the old ones).John Oh BTW not to rag or anything but mid 14 w/ your mods seems slow to me. My coupe ran a 14.03 w/out cam intake & head work on a stock stall AOD and its a full weight car. ------------------ 89 Notch: ASP Pullies, K&N Air,Transgo shiftkit,Trans. cooler,FMS 3 core , FMS 4:10's, 1.5" cowl, cold air kit, hooker shorties(jet hot coated), O/R H-Pipe, ASP solid mounts, Energy Sus. Trans. Mnt. BBK 70mm TB, MSD 6al, Dual elec. fans, 5.0 Firepower Kit, Scorpion 1.6 RR's, Flowmasters, 73 mm MAF, cobra intake(ported), 1" phenolic spacer,ported stock heads and crower #512 cam. [This message has been edited by John (edited 09-29-2001).]