MustangWorks.com : Ford Forums - View Single Post - This is my combo... What must I do to run 11's!?

jz_mustang50 · 09-30-2001, 12:19 PM

Ok... What I want to do is run 11's ALL MOTOR. No power adders. I want to keep my STOCK SHORT BLOCK and I'm staying with the AOD!!!!!!!! Tell me what more I need to do to my car. Check out my signature below to see what my car consists of. What I really wanted to do was just add to the motor, ie heades/intake/cam/injectors/maf/tb/torque converter. My next thing I'm doing is adding long tube 1 5/8 with 3 in collector headers so consider that done. Tell me what else I need to do! I have alot of opinions that very ALOT. I'd like to come to a conclusion about what will and what won't work before i DO IT.

------------------
Joe Zemaitis, Grand Rapids Michigan

1991 Mustang GT. Mods to date: 4.10 rear end, new POSI, aluminum driveshaft, AOD w/ shift kit, 2 1/2 off road h-pipe, 2 1/2 flowmasters and 2 1/2 tail pipes. Electric fan, Removed air pump and egr tube. Jegs brand upper and lower adjustable control arms. Removed back seats. Hoosier Quick Time Pro 27x10.5x15 and bolt on subframes soon to be welded. Everything else is STOCK. Totally stock ENGINE. 14.29@96 with 130k miles.

09-30-2001, 12:19 PM	#1
jz_mustang50 Registered Member Join Date: Sep 2001 Location: Grand Rapids, Michigan, USA Posts: 50	This is my combo... What must I do to run 11's!? Ok... What I want to do is run 11's ALL MOTOR. No power adders. I want to keep my STOCK SHORT BLOCK and I'm staying with the AOD!!!!!!!! Tell me what more I need to do to my car. Check out my signature below to see what my car consists of. What I really wanted to do was just add to the motor, ie heades/intake/cam/injectors/maf/tb/torque converter. My next thing I'm doing is adding long tube 1 5/8 with 3 in collector headers so consider that done. Tell me what else I need to do! I have alot of opinions that very ALOT. I'd like to come to a conclusion about what will and what won't work before i DO IT. ------------------ Joe Zemaitis, Grand Rapids Michigan 1991 Mustang GT. Mods to date: 4.10 rear end, new POSI, aluminum driveshaft, AOD w/ shift kit, 2 1/2 off road h-pipe, 2 1/2 flowmasters and 2 1/2 tail pipes. Electric fan, Removed air pump and egr tube. Jegs brand upper and lower adjustable control arms. Removed back seats. Hoosier Quick Time Pro 27x10.5x15 and bolt on subframes soon to be welded. Everything else is STOCK. Totally stock ENGINE. 14.29@96 with 130k miles.