Re: Check Oil Light and No Oil Circulation
Quote:
|
Originally Posted by StormsofAres86gt
ok, so y not use fram? i have one to go on my car, but it isnt on there yet...
|
Since doing some reading I have only used Fram filters for initial startups on a fresh rebuild. Basically it only has to work for a few minutes.
The major problem is the anti drainback valve, but the rest of the internals are not as good as in other filters.
Read these if you want to get into all the details
http://people.msoe.edu/~yoderw/oilfi...lterstudy.html
http://people.msoe.edu/~yoderw/oilfi...ilfilters.html
Here is a shameless plug for my site
http://www.freewebs.com/vristang/referencedwebsites.htm
I have a couple other good oil reads on that page (at the bottom).
jason
__________________
Check out my new Mustang website! - Including: TwEECer, EEC-IV, C&L, 351w Fox Swaps, PCV Oil Control, and more.
1990 GT - 408w - 17mpg
TwEECer RT 1.30A10 - X3Z - A9L strat. / EA
Forged Bottom End / Gapless Rings / CR 8.85:1 / Custom Cam / Ported Trick Flow Heads / Box Upr / Lightning Lwr
17x9 Cobras / Front 255s / Rear 275s / 5 Lug Cobra Disc Conversion / Auburn Ltd. Slip / 3.27 / 31 spline axles / Panhard Rod / Upr&Lwr Control Arms
1987 Red LX - 2.3L - Planning 2.3t Converison
|