View Single Post
Old 08-26-2006, 07:48 PM   #2
meknized
fox fanatic
 
meknized's Avatar
 
Join Date: Jul 2004
Location: wichita Ks.
Posts: 61
Default Re: Rear shoulder belts in an '86 coupe

Hey,

The mustangs I'm sure you know, only had lapbelts until 1989. Then in 1990 the air bags was introduced and so was the rear selt shoulder belts. The '90 and ups had an extra anchor welded on top of the rear shock area, and that nessesitated a different interior panel. I used to have 90 GT that had a red interior and I had a 89 GT parts car that had a grey interior. When I went to change the interiors that is when I discovered the difference. You might be able to have the rear shoulder belt anchor cut off of another car and have it welded into your car. You would probably need a bit of a 90 and up interior to cover the anchor. That panel that fits there is pretty large. I'm sure it could be done.
__________________
meknized

Blue/silver 89 GT, Coast 331, ported GT-40x heads, X cam, cobra intake, 70mm TB, 75mm bullet, mac intake, 24lb inj, 255 lph fuel pump, accufab regulator, pulleys, MSD coil, 6AL, 300+ wires, Tremec 5 spd. pro 5.0 shifter, FMS drive shaft, headers, X-pipe, flowmasters, auburn pro series posi. moser 31s axles,3:73s, etc. Best ET 12.02@112.5
a pic A vid of a run:http://www.youtube.com/watch?v=l9JMcErxML8
meknized is offline   Reply With Quote