Re: Heads or Cam?
You have your valves set too tight which is hanging the valve open and resulting in zero compression.
Tighten the rocker until there is no up and down movement in the pushrod and then go 1/2 a turn
When the intake valve starts to close set the exhaust valve.
When the exhaust valve starts to open set the intake valve.
You can thank me later,
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
|