Valves
Well peeps I just put together my motor...302 GT40P heads that has been ported all the way open too 260cfm...1.7 rockers,+trick flow stage one cam .499/.510 lift,24lbs injec,73mm mass air meter,trick flow track heat intake,70mm throttle body...The only thing I forgot to do was check the valve to piston clearance...This is a stock botom end so wish me good luck...Bythe way i havent fire the car yet im still waiting to see if anyone no if this set up will be okay...
__________________
hrdroc-.600 lift springs GT40P heads ported all the way out,1.6 ratio roller rockers,24lb injectors,70mm throttle body,under pulley's,cobra intake port match to the head,trick flow stage 1 cam .499/.510 lift,cold air intake,73mm mass air meter,adj fuel pressure regulator. stock bottom end
et street slicks- 13.50@104.99 best 60ft. 1.720 3.73 gears
reg street tires- 14.89@101.25 best 60ft. 2.090 3.08 gears
|