MustangWorks.com : Ford Forums - View Single Post

meknized · 09-08-2007, 05:49 PM

Thanks for the tip. According to Laurel Mountain Mustang, they say they have a K- member that will work, however I have a friend with a '92 LX that has that one on and he has had to have it welded two times. Not that it broke through or anything but he was having cracks where the mounting pads that attach to the frame and the tubular structure were cracking. I don't know if it his driving, (extremely aggresive with a 347) or the quality of the product. It definitely steered me from buying that brand though.

09-08-2007, 05:49 PM	#4
meknized fox fanatic Join Date: Jul 2004 Location: wichita Ks. Posts: 61	Re: Tubular K member Thanks for the tip. According to Laurel Mountain Mustang, they say they have a K- member that will work, however I have a friend with a '92 LX that has that one on and he has had to have it welded two times. Not that it broke through or anything but he was having cracks where the mounting pads that attach to the frame and the tubular structure were cracking. I don't know if it his driving, (extremely aggresive with a 347) or the quality of the product. It definitely steered me from buying that brand though. __________________ meknized Blue/silver 89 GT, Coast 331, ported GT-40x heads, X cam, cobra intake, 70mm TB, 75mm bullet, mac intake, 24lb inj, 255 lph fuel pump, accufab regulator, pulleys, MSD coil, 6AL, 300+ wires, Tremec 5 spd. pro 5.0 shifter, FMS drive shaft, headers, X-pipe, flowmasters, auburn pro series posi. moser 31s axles,3:73s, etc. Best ET 12.02@112.5 a pic A vid of a run:http://www.youtube.com/watch?v=l9JMcErxML8