well, first off the intake should be a perf. rpm, and it will need to be slightly ported . next, since youre using juice you should use a 650 dp. as far as comp. itll probably be around 9.5:1. just because you have .030 over bore it will not increase comp by one point. as far as pistons, ford uses trw's so its gonna be close to the same. realistically you will get around 260 hp or so. you will not get 100 hp from a 100 shot of nitrous. assuming you know nitrous and how to tune it properly you might get 70 hp. if you just want 12's then that is all you need. if you want a budget combo for 12's i have a few, and most use stock heads and cam.
|