MustangWorks.com : Ford Forums - View Single Post

gt93mustang · 01-23-2001, 08:43 PM

OK guys and gals... here is my newest problem. I went out Sunday night to some local street races and for the first time in a long while. I gave a camaro three cars and only pulled him by one car because I was spinning through third and only catching traction in fourth. I am not so informed on the suspension side of mustangs, so I don't have any clue as to what I need to make my car hook up. I already have adjustable Griggs lower control arms in the rear and subframe connectors (do they do anything for traction?) but what else do I need? I don't want to pull my front sway bar because I drive my car on the streets and highways about 50 miles a day. I am already looking into a pair of drag radials, but I need specifics as far as shocks, springs, etc... Thanks in advance everyone.

------------------
MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Fully Adustable Lower Control Arms... and probably some more in there I forgot

01-23-2001, 08:43 PM	#1
gt93mustang Registered Member Join Date: Feb 1999 Location: Kennesaw, Georgia, USA Posts: 252	I need help with suspension OK guys and gals... here is my newest problem. I went out Sunday night to some local street races and for the first time in a long while. I gave a camaro three cars and only pulled him by one car because I was spinning through third and only catching traction in fourth. I am not so informed on the suspension side of mustangs, so I don't have any clue as to what I need to make my car hook up. I already have adjustable Griggs lower control arms in the rear and subframe connectors (do they do anything for traction?) but what else do I need? I don't want to pull my front sway bar because I drive my car on the streets and highways about 50 miles a day. I am already looking into a pair of drag radials, but I need specifics as far as shocks, springs, etc... Thanks in advance everyone. ------------------ MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Fully Adustable Lower Control Arms... and probably some more in there I forgot