I run no front sway bar, 70/30's, 50/50's and the Eibach DRAG launch kit. Lots of transfer, but I don't take corners hard, I really am not into that, that can be seem with my 15 x 3.5 Draglites on the front.
Get the struts and shocks, and if you don't want to buy a good set of uppers, weld plates on your stock uppers to box them in, it helps a lot. I set my pinion angle at 5 degrees which is about the max for a street car anything over 5 degrees should be run at the track only. Don't neglet the torque boxes either, you should weld them up and add a re-enforcement kit. I make a kit that is similar to the BAttle boxes but it has some added support that they don't, they are made from stainless instead of stell so they won't rusyt and they are stronger, e-mail me if your intrested
Rick
------------------
My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98