MustangWorks.com : Ford Forums - View Single Post - car looks like 4x4 after drag launch springs

Rick 91GT · 05-09-2001, 11:47 AM

I have no idea why some of you guys have this problem it lowered my car 1.5" atleast when I did the Eibach kit, 70/30's and 50/50's. My car actually sits a little lower in the front then rear

, I told Sky the same things a couple months back.

WADS56- Hold on and look out for the 10's

, those lowering springs had to be putting a good hurtin' on the travel of the suspension. You will need to play with the airbag id it doesn't come off straight, start at around 12psi with your car and go from there.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

05-09-2001, 11:47 AM	#6
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	I have no idea why some of you guys have this problem it lowered my car 1.5" atleast when I did the Eibach kit, 70/30's and 50/50's. My car actually sits a little lower in the front then rear , I told Sky the same things a couple months back. WADS56- Hold on and look out for the 10's , those lowering springs had to be putting a good hurtin' on the travel of the suspension. You will need to play with the airbag id it doesn't come off straight, start at around 12psi with your car and go from there. ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!