MustangWorks.com : Ford Forums - View Single Post

bcinyuz · 02-26-2001, 11:30 PM

Please tell me the one and only way to properly adjust a set of crane adjustable rocker arms so they dont make any noise at all. The way I was told to adjust them was to rotate the engine until the cam lobe is 180 from total lift, zero lash the rocker arm, then turn the adjusting nut 1/4 turn, then back off 1/8. Is this correct, what am I doing wrong.

02-26-2001, 11:30 PM	#1
bcinyuz Registered Member Join Date: Aug 2000 Location: lodi,ca,usa Posts: 86	Rocker Arm Adjustment Please tell me the one and only way to properly adjust a set of crane adjustable rocker arms so they dont make any noise at all. The way I was told to adjust them was to rotate the engine until the cam lobe is 180 from total lift, zero lash the rocker arm, then turn the adjusting nut 1/4 turn, then back off 1/8. Is this correct, what am I doing wrong.