Have you checked for continuity on the multi function switch?
If you dont have a meter or tester, get one of those boxy flashlight's that use the big 12V batteries.
You'll need two jumper wires, one will go from the center terminal on the 12 V battery to the normaly hot terminal of the switch you want to test, the other will come from the bulb and lead to the switch terminal for the turn signals, then just work the switch, if it's good, the flashlight should light up.
Or you could just go get yourself a basic DMM from radio Crack for $20. I recall them having a mini pocket-sized job that would work for basic tests like this.
|