MSD or ACCEL?

scale · 01-25-2002, 10:41 PM

I am looking into getting a super coil or a blaster coil but i dont know weather to get the accel super coil (Part#ACC-140012) or the msd blaster Part#MSD-8227.

Any thoughts on either? I dont want to do any heavy mods and i know these bolt right up.

I am assuming they are pretty close to the same thing but i thought i would check first

Coupe5oh · 01-25-2002, 11:38 PM

I have the accell supercoil, no problems, it does require a little splicing if i remember, my friend has the msd one, but he drives his car about twice a month, on an everyday driver like mine, my Supercoil works fine, dont be surprised if you hear a little noise from them.

PKRWUD · 01-26-2002, 03:23 AM

The MSD coils tend to be "loud". I recommend a Crane PS91.

Take care,
-Chris

01-25-2002, 10:41 PM	#1
scale Registered Member Join Date: Mar 2000 Location: minneapolis, mn Posts: 158	MSD or ACCEL? I am looking into getting a super coil or a blaster coil but i dont know weather to get the accel super coil (Part#ACC-140012) or the msd blaster Part#MSD-8227. Any thoughts on either? I dont want to do any heavy mods and i know these bolt right up. I am assuming they are pretty close to the same thing but i thought i would check first __________________ 1991 LX coupe,AOD, red, 80k, K&N, MAC cat back, MAC off-road X, Autometer Gauges, BBK Ceramic unequals, fully polished upper intake, fuel rails, and egr, working on installing.....MM full length subs, H&R sport springs, MM Lower control arms, MM caster camber plates, bilstein shocks, struts.

01-25-2002, 11:38 PM	#2
Coupe5oh Registered Member Join Date: Nov 2001 Location: SanAntonio, Tx Posts: 734	I have the accell supercoil, no problems, it does require a little splicing if i remember, my friend has the msd one, but he drives his car about twice a month, on an everyday driver like mine, my Supercoil works fine, dont be surprised if you hear a little noise from them. __________________ Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph

01-26-2002, 03:23 AM	#3
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	The MSD coils tend to be "loud". I recommend a Crane PS91. Take care, -Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Accel AFPR anygood?	Lethal5Oh	Windsor Power	5	06-27-2002 01:50 AM
Questions about DIS-4 and Accel CoilPacks	98SteedaGT	Modular Madness	1	01-16-2002 02:12 PM
which accel billetech distributor, auto or manual?	Strim91GT	Windsor Power	0	10-22-2001 08:26 PM
Accel 5.8L Distributor HELP!	Tony91LX	Windsor Power	7	06-13-2001 03:01 PM