Linear Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-31-2002, 02:45 PM
|
#1 |
|
Registered Member
Join Date: Feb 2002
Location: Jacksonville, FL
Posts: 706
|
Clogged injector????
What does a bad injector spray pattern do to your car?
Is it evident in a dyno a/f graph or can it be masked? I am continuing my troubleshooting form my porr dyno run and everything electrical up top checks out. Good plugs, wires, cap, coil, dist, TFI...still have a miss that feels like a "lean miss" but my a/f is good. Have to pull the intake and valve covers and check springs I believe.
__________________
1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy |
|
|
|
03-31-2002, 10:01 PM
|
#2 |
|
Moderator
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
|
A friend of mine Performance Fuel Systems (Detroit) can flow/clean them in his shop. He did mine. Tell him I sent you so he knows where you got his number from...
<private email>-------------------- ALAPetrulis@eaton.com Flowtest only: includes low and high rpm test and wide-open static flow test $8.00/injector (e.g. $64 for a set of 8) Reconditioning: includes flowtest before and after, ultra-sonic cleaning, flushing, new o-rings, and filter if required, coil test, leak test, and spray pattern check. $18.00/injector (e.g. $144 for a set of 8) Check or money orders to be issued to Performance Fuel Systems, Inc.. $7.50 shipping and handling (regular UPS ground) $6.00 additional if COD. Performance Fuel Systems, Inc. 2344 Chilson Rd. Howell, MI. 48843 Algis Petrulis <end>---------------------------
__________________
Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com |
|
|
|
|
04-01-2002, 01:36 AM
|
#3 |
|
Registered Member
Join Date: Jun 2000
Location: Stillwater, OK
Posts: 107
|
I had a bad injector a few months ago and it made a pecking noise, sounded like an exhaust leak. Cleaning didn't help mine it was too gunked up, i ended up replacing it.
__________________
94 cobra, steeda tri-ax, bbk longtubes, dr. gas x pipe, eec tuner, ultra flo's, 65 mm tb, underdrives, 75 mm MAF, homemade CAI, steeda #19 cam, Steeda LCA's, 3.73's, subframes 13.7 @ 103.03 before cam and gears |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| injector problem, question? | Coupe50h | Windsor Power | 5 | 03-20-2003 12:23 AM |
| Injector problems | weagle | Windsor Power | 1 | 01-21-2002 06:14 PM |
| Experienced Fuel Injector harness question | Stang_ROTY | Windsor Power | 5 | 07-19-2001 11:46 PM |
| Injector Leak HELP!!!!! | Z28EATR | Windsor Power | 1 | 04-28-2001 11:33 AM |
| SC T-Bird or SVO Mustang Injector size | MiracleMax | Windsor Power | 4 | 03-13-2001 01:51 AM |