gear install ? sn95

sn95gt19 · 04-06-2002, 10:51 PM

i was just wondering if anyone knew how the hell i get the abs sensors out. i cannot get the abs sensors out of the rear to install my gear. if anyone has any tips PLEASE I NEED HELP AND THIS HAS TO BE DONE BY MONDAY. THANKS

Green9550 · 04-07-2002, 01:06 PM

Uh... I don't know if this will help you or not, but I had a shop do mine and the only way he could do the gears was to break the sensor and get a new one. Good luck.

-Billy

sn95gt19 · 04-07-2002, 04:37 PM

i was told that the sensors cost about $50.00 a piece otherwise i would have already broken them. but thanks anyway i will see how much they actually are.

Green9550 · 04-07-2002, 06:47 PM

Hey man, I know that didn't help too much, but my mechanic said that he had to do that to do the install. I think I payed about $60 2 years ago. Good luck man. Let me know what you find out.

-Billy

04-06-2002, 10:51 PM	#1
sn95gt19 motors done......woohooo Join Date: Mar 2002 Posts: 799	gear install ? sn95 i was just wondering if anyone knew how the hell i get the abs sensors out. i cannot get the abs sensors out of the rear to install my gear. if anyone has any tips PLEASE I NEED HELP AND THIS HAS TO BE DONE BY MONDAY. THANKS

04-07-2002, 01:06 PM	#2
Green9550 Resident Redneck Join Date: Jan 2002 Location: Cecil County, MD Posts: 165	Uh... I don't know if this will help you or not, but I had a shop do mine and the only way he could do the gears was to break the sensor and get a new one. Good luck. -Billy __________________ 95' GT: 306, XL Ross Pistons, Ultra Lite H-beam Rods, Forged Scat Crank, 28oz Romac, 28oz JW flexplate, FTI ported RPM II intake, FTI ported AFR 165's, FTI custom cam, 75mm BBK Throttle body, 80mm Pro-M, 4800 PI stall, PA Super Comp AODE, Strange 33 spline race axles, Strange ultra lite spool, Motive lite 4.30's, Strange rear race brakes, Mega bite seniors, double adjustable uppers w/spherical bushings, Racecraft anti-roll bar, LPW rear end girdle, Metco d/s loop, A9L conversion, AFM PMS

04-07-2002, 06:47 PM	#4
Green9550 Resident Redneck Join Date: Jan 2002 Location: Cecil County, MD Posts: 165	Hey man, I know that didn't help too much, but my mechanic said that he had to do that to do the install. I think I payed about $60 2 years ago. Good luck man. Let me know what you find out. -Billy __________________ 95' GT: 306, XL Ross Pistons, Ultra Lite H-beam Rods, Forged Scat Crank, 28oz Romac, 28oz JW flexplate, FTI ported RPM II intake, FTI ported AFR 165's, FTI custom cam, 75mm BBK Throttle body, 80mm Pro-M, 4800 PI stall, PA Super Comp AODE, Strange 33 spline race axles, Strange ultra lite spool, Motive lite 4.30's, Strange rear race brakes, Mega bite seniors, double adjustable uppers w/spherical bushings, Racecraft anti-roll bar, LPW rear end girdle, Metco d/s loop, A9L conversion, AFM PMS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Loud "pop" after clutch install, won't go into gear..	Chris_H	Windsor Power	3	08-11-2003 06:24 PM
gear install	clearwaterms	Modular Madness	6	05-10-2002 03:22 PM
Help Quick Please! Ring gear install question???	90'5.0 Conv	Windsor Power	5	05-03-2002 07:53 PM
3.73 Gear Install	PonyPride	Modular Madness	9	10-09-2001 08:45 PM
what is the going price of gear install?	82 GT	Windsor Power	9	03-08-2001 05:16 PM

04-07-2002, 04:37 PM	#3
sn95gt19 motors done......woohooo Join Date: Mar 2002 Posts: 799	i was told that the sensors cost about $50.00 a piece otherwise i would have already broken them. but thanks anyway i will see how much they actually are.