any Auto Tranny experts?

slo95 · 04-20-2001, 01:13 PM

I have a stock 95 GT, AODE. I had a 628 code, excessive convertor slippage. Had that replaced a little over a month ago, and am now getting the same code on the new convertor. What would cause this? And what does the transmission solenoid do (how many, if more than one)? I think it is tied to the convertor somehow, and it may be causing the convertor to not lock up (excessive slippage). Been having idle problems at stop lights. Been thru the cleaning, swapping parts, and am down to this.

NOS_Notch · 04-20-2001, 08:01 PM

on all 3 AOD rebuilds i had done..i was told they couldn't use the stock converter after it was contaminated.
Did you get a new one???
Sounds typical for AOD though....

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com

11's coming soon!!!!
Heads,intake and cam are all here

slo95 · 04-21-2001, 04:28 PM

The Ford dealer here takes care of me...(really) and they gave me a new "stock" convertor after getting the slippage code. So, I am still running a stock convertor, just a new one.

jimberg · 04-21-2001, 05:57 PM

What about your pinging? Did the new overflow bottle stop that?

------------------
351W 89 Mustang GT Convertible

04-20-2001, 01:13 PM	#1
slo95 Registered Member Join Date: Dec 2000 Posts: 168	any Auto Tranny experts? I have a stock 95 GT, AODE. I had a 628 code, excessive convertor slippage. Had that replaced a little over a month ago, and am now getting the same code on the new convertor. What would cause this? And what does the transmission solenoid do (how many, if more than one)? I think it is tied to the convertor somehow, and it may be causing the convertor to not lock up (excessive slippage). Been having idle problems at stop lights. Been thru the cleaning, swapping parts, and am down to this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What auto tranny do you recomend for a 96 Stang?	Hethj7	Modular Madness	3	04-21-2004 05:10 AM
93 Merc Sable auto tranny problem	mean81GT	Blue Oval Lounge	1	11-12-2002 09:20 PM
Auto Tranny in 2000 V6	Bake	Small Ponies	2	07-30-2002 01:53 PM
power handling of auto tranny	joegodfrey	Modular Madness	4	12-29-2001 08:41 AM
99 GT, auto tranny rebuild	red99stang	Modular Madness	5	05-22-2000 03:37 AM

04-20-2001, 08:01 PM	#2
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	on all 3 AOD rebuilds i had done..i was told they couldn't use the stock converter after it was contaminated. Did you get a new one??? Sounds typical for AOD though.... ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.webprovider.com 11's coming soon!!!! Heads,intake and cam are all here

04-21-2001, 04:28 PM	#3
slo95 Registered Member Join Date: Dec 2000 Posts: 168	The Ford dealer here takes care of me...(really) and they gave me a new "stock" convertor after getting the slippage code. So, I am still running a stock convertor, just a new one.

04-21-2001, 05:57 PM	#4
jimberg Registered Member Join Date: Oct 1998 Location: Rogers, MN Posts: 2,089	What about your pinging? Did the new overflow bottle stop that? ------------------ 351W 89 Mustang GT Convertible