1995 gt

05-02-2001, 09:16 PM

who ever can guess the closest to my 1/4 mile e.t, mph, and 60 foot time is cool

------------------
1995 gt convertible:
3.55 gears, underdrive pulleys, cobra intake , fenderwell cold air, 65mm throttle body, 75mm mass air meter, off-road h pipe, borla cat back, custom diablo chip, 155lph fuel pump lentech aode street terminator w/ 10" converter stalls at 2800 rpms, yokohama a520(drag radials) 275s

[This message has been edited by nate andrus (edited 05-02-2001).]

blueneonman1 · 05-02-2001, 09:55 PM

TEXSN95 · 05-02-2001, 11:59 PM

14.34 @ 97.4 w/ 2.05

------------------
Clint L.
White 95 Cobra #3637
58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW lower control arms, Steeda CC plates, aluminum driveshaft, Steeda quadrant, MSD6A, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s
13.61 @ 104.7 w/ 2.22

[This message has been edited by TEXSN95 (edited 05-03-2001).]

95mustanggt · 05-03-2001, 08:10 AM

I'm going to say 13.9.
I didn't see any aftermarket heads, I think that is holding you up.

------------------
Driving: 1998 F-150
Far way in Edmonton==>

1995 Mustang GT

lx mike · 05-03-2001, 09:17 AM

I'd say around 14.3-14.5 @ 96-97, could use more gear with that heavy vert. what tires are u using? with that stall converter you might have traction troubles.

------------------
93-LX: 5 Speed, Flow's with H-Pipe, 3.73's Sub's and K&N.

[This message has been edited by lx mike (edited 05-03-2001).]

Killercanary · 05-03-2001, 10:20 AM

Well, since I have 90% of what you do and I know I run 13.8's at 98mph with 1.91 60's, and my car weighs around 3700lbs with me, I'm gonna guess a 60' of 2.05-2.09, a 1/4 ET of 14.15-14.25 at around 96.7-97.1mph. Throw some 4.10's in there and it'd run even better!!! I'm assuming you'd be slower becuase of the added weight of the tranny, and it is an AODE, but that Lentech will help along with the converter. Well, what did you run?
BTW- do you have an adjustable FPR or headers? The FPR added almost 20RWHP by bumping up the fuel pressure on the dyno, and the factory headers are a joke for performance. With the intake, headers,and T-body I gained about 2-2.5mph.

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire

05-03-2001, 03:44 PM

my best time was a 14.4 @ 93mph until i stuck the lentech tranny with the 10" conveter it dropped my time about 7 tenths!!!
my best time with the drag radials and the lentech installed was a 13.78 @ 99mph i was suprised my 60 foot was a 1.95

------------------
1995 gt convertible:
3.55 gears, underdrive pulleys, cobra intake , fenderwell cold air, 65mm throttle body, 75mm mass air meter, off-road h pipe, borla cat back, custom diablo chip, 155lph fuel pump lentech aode street terminator w/ 10" converter stalls at 2800 rpms, yokohama a520(drag radials) 275s

05-02-2001, 09:16 PM	#1
nate andrus Guest Posts: n/a	1995 gt who ever can guess the closest to my 1/4 mile e.t, mph, and 60 foot time is cool ------------------ 1995 gt convertible: 3.55 gears, underdrive pulleys, cobra intake , fenderwell cold air, 65mm throttle body, 75mm mass air meter, off-road h pipe, borla cat back, custom diablo chip, 155lph fuel pump lentech aode street terminator w/ 10" converter stalls at 2800 rpms, yokohama a520(drag radials) 275s [This message has been edited by nate andrus (edited 05-02-2001).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Are all 8.8 rears the same?	82 GT	Windsor Power	29	08-23-2004 01:06 PM
Tips on buying an 87 GT(is it really a GT?)	LincoConti87	Windsor Power	9	07-23-2004 08:08 PM
Wont Start, help! 1995 GT 5.0	Year2001Boogie	Windsor Power	13	05-05-2004 09:26 PM
1996 Cobra vs 1995 GT and an Eclipse	Milktasd	Stang Stories	10	02-04-2002 03:02 PM
ran a '01 GT	EZRIDN	Stang Stories	3	08-29-2001 08:17 PM

05-02-2001, 09:55 PM	#2
blueneonman1 Registered Member Join Date: Mar 2001 Location: Palm Harbor, FL Posts: 208	Ooh! I want to be cool! I guess 15.0! No, really, is it 13.6? ------------------ Blueneonman - '95 5.0L Mustang GT Convertible \| K&N Drop-in \| FMS 9mm Wires \| Hollow Cats \| Flowmaster 2 Chambers \| Subframes \| 6-pt Rollcage \| 14deg Timing \| Coolest Neon Lighting on a Mustang EVER! Best time: 14.8 @94mph

05-02-2001, 11:59 PM	#3
TEXSN95 Registered Member Join Date: Mar 2001 Location: college station, tx Posts: 143	14.34 @ 97.4 w/ 2.05 ------------------ Clint L. White 95 Cobra #3637 58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW lower control arms, Steeda CC plates, aluminum driveshaft, Steeda quadrant, MSD6A, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s 13.61 @ 104.7 w/ 2.22 [This message has been edited by TEXSN95 (edited 05-03-2001).]

05-03-2001, 08:10 AM	#4
95mustanggt Registered Member Join Date: May 2000 Location: Kamloops, BC Posts: 2,875	I'm going to say 13.9. I didn't see any aftermarket heads, I think that is holding you up. ------------------ Driving: 1998 F-150 Far way in Edmonton==> 1995 Mustang GT

05-03-2001, 09:17 AM	#5
lx mike Undescribable Join Date: Sep 1998 Location: Ft Myers Fla Posts: 1,539	I'd say around 14.3-14.5 @ 96-97, could use more gear with that heavy vert. what tires are u using? with that stall converter you might have traction troubles. ------------------ 93-LX: 5 Speed, Flow's with H-Pipe, 3.73's Sub's and K&N. [This message has been edited by lx mike (edited 05-03-2001).]

05-03-2001, 10:20 AM	#6
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	Well, since I have 90% of what you do and I know I run 13.8's at 98mph with 1.91 60's, and my car weighs around 3700lbs with me, I'm gonna guess a 60' of 2.05-2.09, a 1/4 ET of 14.15-14.25 at around 96.7-97.1mph. Throw some 4.10's in there and it'd run even better!!! I'm assuming you'd be slower becuase of the added weight of the tranny, and it is an AODE, but that Lentech will help along with the converter. Well, what did you run? BTW- do you have an adjustable FPR or headers? The FPR added almost 20RWHP by bumping up the fuel pressure on the dyno, and the factory headers are a joke for performance. With the intake, headers,and T-body I gained about 2-2.5mph. ------------------ 95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior Best ET: 13.83 Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire

05-03-2001, 03:44 PM	#7
nate andrus Guest Posts: n/a	my best time was a 14.4 @ 93mph until i stuck the lentech tranny with the 10" conveter it dropped my time about 7 tenths!!! my best time with the drag radials and the lentech installed was a 13.78 @ 99mph i was suprised my 60 foot was a 1.95 ------------------ 1995 gt convertible: 3.55 gears, underdrive pulleys, cobra intake , fenderwell cold air, 65mm throttle body, 75mm mass air meter, off-road h pipe, borla cat back, custom diablo chip, 155lph fuel pump lentech aode street terminator w/ 10" converter stalls at 2800 rpms, yokohama a520(drag radials) 275s