Where to get headers coated in Indy

ciara · 02-01-2003, 06:37 PM

I have a set of Hooker super competition headers on my 351. Is there any where in the Indianapolis area where I can get them coated? I have header wrap on them now and don't like it.

stangsrule · 02-02-2003, 01:53 AM

I'm sure there must be a place in Indy but don't know of one personaly. However I do know there is a place in Kokomo that does them for sure. Called Performance Powder Coating I think...

Mustang_289 · 02-02-2003, 07:10 AM

JetHot coating is the best - you can ship them the headers and they'll clean them up, and apply JetHot coating. You can even call them up to find someone in the area - but they'll need to do the same thing mail them off to JetHot.

http://www.jet-hot.com/home.html

stangsrule · 02-02-2003, 01:28 PM

I was told the place in Kokomo does Jet Hot but I have never talked to them myself. Indy is a big place and and the home of many race teams so I wouldn't be a bit surprised if there were several places that do it down there but you might have to make a few phone calls to find out. You might start out by calling Kenny Brown and see if they know of a place, they are on Gasoline Alley...

02-01-2003, 06:37 PM	#1
ciara Registered Member Join Date: Jan 2002 Posts: 100	Where to get headers coated in Indy I have a set of Hooker super competition headers on my 351. Is there any where in the Indianapolis area where I can get them coated? I have header wrap on them now and don't like it.

02-02-2003, 01:53 AM	#2
stangsrule Registered Member Join Date: May 1999 Location: Indiana Posts: 512	I'm sure there must be a place in Indy but don't know of one personaly. However I do know there is a place in Kokomo that does them for sure. Called Performance Powder Coating I think... __________________ 92GT Lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, SMC Alky Injection kit, J&S Knock Gaurd, TwEECer RT and a bunch of other stuff!

02-02-2003, 01:28 PM	#4
stangsrule Registered Member Join Date: May 1999 Location: Indiana Posts: 512	I was told the place in Kokomo does Jet Hot but I have never talked to them myself. Indy is a big place and and the home of many race teams so I wouldn't be a bit surprised if there were several places that do it down there but you might have to make a few phone calls to find out. You might start out by calling Kenny Brown and see if they know of a place, they are on Gasoline Alley... __________________ 92GT Lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, SMC Alky Injection kit, J&S Knock Gaurd, TwEECer RT and a bunch of other stuff!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ceramic Coated headers	rwhite65	Windsor Power	7	09-15-2004 03:31 PM
Mac Ceramic coated headers?	DemonGT	Windsor Power	7	03-27-2003 06:15 PM
Anyone have problems with MAC headers??	HiFlow5 0	Windsor Power	15	05-30-2002 08:30 AM
BBK Jet Coated Headers......	scale	Windsor Power	4	10-19-2001 01:55 PM
Mac headers coated with high temp baked on paint	DemonGT	Windsor Power	5	04-27-2001 01:30 PM

02-02-2003, 07:10 AM	#3
Mustang_289 Registered Member Join Date: Sep 2001 Posts: 512	JetHot coating is the best - you can ship them the headers and they'll clean them up, and apply JetHot coating. You can even call them up to find someone in the area - but they'll need to do the same thing mail them off to JetHot. http://www.jet-hot.com/home.html