Best Place To Buy A 4" Cowl Hood?????

BowTie Eater 5 Liter · 06-01-2001, 08:27 PM

i want a good price, but dont want to spend 9hours making it fit

------------------
1988 Mustang GT, T-5
3.08's, No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe, K&N Air Filter (Stock Air Box), Removed Air SilencerMy Stang
My Site (Not Done Yet)

NOS_Notch · 06-02-2001, 10:32 AM

Quote:

Originally posted by BowTie Eater 5 Liter:
i want a good price, but dont want to spend 9hours making it fit

From what i've seen...you can't have both.
Try cervini, harwood, or HO fibretrends

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.stangnet.com

11's coming soon!!!!
Heads,intake and cam are all here

1BAD89 · 06-02-2001, 10:03 PM

HARWOOD IS THE ONLY WAY TO GO! I ORDERED A 4 INCH COWL FOR MY S-10, SUPERIOR QUALITY! bad as*! SO I ORDERED THE 4 INCH COWL FOR MY STANG TOO. I ORDERED IT FOM JEGS IT WAS $444+$89 FOR THE TRUCK FREIGHT. Total with shipping was $540, remember you get what you pay for. I don't like that 90 truck freight but it is like that from everywhere. See ya.

------------------
3:55's,BBK Off-Road H-pipe,BBK jet-hot coated equal length shorty headers,BBK 70mm Throttle Body,BBK adjustable clutch quadrant,C & L 76mm Mass air meter,Cobra R's 17x9 w/ 245's,Trick Flow Intake,Flowmaster Force II exhaust system, Super Duty T5,Centerforce II Clutch,Heavy Duty Radiator,9mm Ford racing plug wires,Accel cap and Rotor
http://www.geocities.com/i8urvpr/JM.html?987369348700

joe4speed · 06-02-2001, 11:42 PM

I bought mine from Cervini, and it's awesome, I did not have to make it fit at all, it came perfect! Good luck!! I think besides the rims, hoods are the best look enhancers available!!

------------------
Joe!
1988 GT, 167,000 miles!!! 13.58@105mph Check out my listing! Click here! Or my website:
www.joe4speed.com
1999 Ninja ZX-6R 10.32@135mph!
1993 Olds Eighty Eight LSS 16.40@88.8mph

stangsrule · 06-03-2001, 12:26 AM

My vote is for Cervini's also...

------------------
92GT all the free stuff and a few bolt-ons, lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, etc.

BowTie Eater 5 Liter · 06-03-2001, 01:17 AM

i like the look of the mustang parts specialties 4"cowl, it is on the www.stangparts.com what do u think of it for 375?

EvilHorace · 06-03-2001, 11:17 PM

I recently bought a Cervini's and it's great!
Pic: http://www.geocities.com/oaks56/latest_4_29_01.x

------------------
351 HO SVO Crate motor, complete (385HP).
Victor Jr intake with Barry Grant/Race Demon 750cfm carb
MSD billet distibutor, set at 18 degrees baseline for 38 degree max advance at 3500 rpm
MSD 6AL sparkbox, adjustable/dial rev control
Motorsport Headers, 2.5" off-road H pipe, 2 chamber Flowmasters (very loud)

[This message has been edited by EvilHorace (edited 06-04-2001).]

06-04-2001, 12:04 AM

EvilHorace

Nice CAR!!

------------------

Paxton Blown 87GT
ICQ#91504337

jetuomi · 06-04-2001, 12:53 AM

check out ebay.com, I found 2 on there right now for my style (94-98) for around $250-300.. so, much cheaper, hopefully there are some for your style !!

Mach 1 · 06-04-2001, 02:11 AM

hey bowTie Eater, I bought my hood from Stangparts.com. It was the 4" cowl and it measured 5 inches, and looked too big, so I swapped it out for thier 3", which actually measured 2.5", but i am much happier with it.

I paid $300 at a show. I saw it advertised in thier mag. ad for $330 and on the web. If its $375, they recently jacked it up. Its a nice hood. Mine front end needed body adjustments, but after I worked all that out, the hood fits great.

------------------
1993 GT/AOD
'93 Mustang GT

1BAD89 · 06-04-2001, 12:33 PM

Man I got screwed! =P Hopefully it's "you get what you pay for." Anyway I'll post pics of mine when I get(supposed to be here Fri.) See ya.

------------------
3:55's,BBK Off-Road H-pipe,BBK jet-hot coated equal length shorty headers,BBK 70mm Throttle Body,BBK adjustable clutch quadrant,C & L 76mm Mass air meter,Cobra R's 17x9 w/ 245's,Trick Flow Intake,Flowmaster Force II exhaust system, Super Duty T5,Centerforce II Clutch,Heavy Duty Radiator,9mm Ford racing plug wires,Accel cap and Rotor
http://www.geocities.com/i8urvpr/JM.html?987369348700

06-04-2001, 08:15 PM

Actually, if you want to stay within Canada, J&P Performance sells hoods that are of excelent quality. Give them a call at 416-751-9766 for prices.

------------------
91 coupe
3.73's,long tubes,2 1/2" exh,ported stock t-body,ProM-77mm
cobra intake,edelbrock heads,B303,1.72 rr's
36lb inj's,tremec, & a Paxton NOVI 2000!!!
11.020 @128.95 on BFG Drag Radials (275/60/15)

06-01-2001, 08:27 PM	#1
BowTie Eater 5 Liter Registered Member Join Date: Nov 2000 Location: Maple Ridge B.C. Canada, The Best Place In The World Posts: 871	Best Place To Buy A 4" Cowl Hood????? i want a good price, but dont want to spend 9hours making it fit ------------------ 1988 Mustang GT, T-5 3.08's, No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe, K&N Air Filter (Stock Air Box), Removed Air SilencerMy Stang My Site (Not Done Yet)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cervinis cowl hood	Ieatcamaros	Windsor Power	3	02-10-2004 07:55 PM
best place to get cowl induction hood?	onefastlx420	Stang Stories	4	10-01-2001 04:25 PM
best place to get cowl induction hood?	onefastlx420	Blue Oval Lounge	4	10-01-2001 04:25 PM
Help! Hood won't fit! Cowl hood guys please read!	daveGT	Windsor Power	3	08-21-2001 07:49 AM
Cowl hood opening problems	Mach 1	Windsor Power	1	04-25-2001 07:49 PM

06-02-2001, 10:03 PM	#3
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	HARWOOD IS THE ONLY WAY TO GO! I ORDERED A 4 INCH COWL FOR MY S-10, SUPERIOR QUALITY! bad as*! SO I ORDERED THE 4 INCH COWL FOR MY STANG TOO. I ORDERED IT FOM JEGS IT WAS $444+$89 FOR THE TRUCK FREIGHT. Total with shipping was $540, remember you get what you pay for. I don't like that 90 truck freight but it is like that from everywhere. See ya. ------------------ 3:55's,BBK Off-Road H-pipe,BBK jet-hot coated equal length shorty headers,BBK 70mm Throttle Body,BBK adjustable clutch quadrant,C & L 76mm Mass air meter,Cobra R's 17x9 w/ 245's,Trick Flow Intake,Flowmaster Force II exhaust system, Super Duty T5,Centerforce II Clutch,Heavy Duty Radiator,9mm Ford racing plug wires,Accel cap and Rotor http://www.geocities.com/i8urvpr/JM.html?987369348700

06-02-2001, 11:42 PM	#4
joe4speed He said Member...heh, heh Join Date: Sep 1999 Location: Jupiter, Florida U.S.A. Posts: 3,718	I bought mine from Cervini, and it's awesome, I did not have to make it fit at all, it came perfect! Good luck!! I think besides the rims, hoods are the best look enhancers available!! ------------------ Joe! 1988 GT, 167,000 miles!!! 13.58@105mph Check out my listing! Click here! Or my website: www.joe4speed.com 1999 Ninja ZX-6R 10.32@135mph! 1993 Olds Eighty Eight LSS 16.40@88.8mph

06-03-2001, 12:26 AM	#5
stangsrule Registered Member Join Date: May 1999 Location: Indiana Posts: 512	My vote is for Cervini's also... ------------------ 92GT all the free stuff and a few bolt-ons, lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, etc.

06-03-2001, 01:17 AM	#6
BowTie Eater 5 Liter Registered Member Join Date: Nov 2000 Location: Maple Ridge B.C. Canada, The Best Place In The World Posts: 871	i like the look of the mustang parts specialties 4"cowl, it is on the www.stangparts.com what do u think of it for 375?

06-03-2001, 11:17 PM	#7
EvilHorace Registered Member Join Date: Jun 2001 Location: Milwaukee, WI. USA Posts: 1	I recently bought a Cervini's and it's great! Pic: http://www.geocities.com/oaks56/latest_4_29_01.x ------------------ 351 HO SVO Crate motor, complete (385HP). Victor Jr intake with Barry Grant/Race Demon 750cfm carb MSD billet distibutor, set at 18 degrees baseline for 38 degree max advance at 3500 rpm MSD 6AL sparkbox, adjustable/dial rev control Motorsport Headers, 2.5" off-road H pipe, 2 chamber Flowmasters (very loud) [This message has been edited by EvilHorace (edited 06-04-2001).]

06-04-2001, 12:04 AM	#8
Mustanguy Guest Posts: n/a	EvilHorace Nice CAR!! ------------------ Paxton Blown 87GT ICQ#91504337

06-04-2001, 12:53 AM	#9
jetuomi Registered Member Join Date: Dec 2000 Location: Waterloo, ON, Canada Posts: 214	check out ebay.com, I found 2 on there right now for my style (94-98) for around $250-300.. so, much cheaper, hopefully there are some for your style !!

06-04-2001, 02:11 AM	#10
Mach 1 Registered Member Join Date: May 1999 Location: Georgia Posts: 3,866	hey bowTie Eater, I bought my hood from Stangparts.com. It was the 4" cowl and it measured 5 inches, and looked too big, so I swapped it out for thier 3", which actually measured 2.5", but i am much happier with it. I paid $300 at a show. I saw it advertised in thier mag. ad for $330 and on the web. If its $375, they recently jacked it up. Its a nice hood. Mine front end needed body adjustments, but after I worked all that out, the hood fits great. ------------------ 1993 GT/AOD '93 Mustang GT

06-04-2001, 12:33 PM	#11
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	Man I got screwed! =P Hopefully it's "you get what you pay for." Anyway I'll post pics of mine when I get(supposed to be here Fri.) See ya. ------------------ 3:55's,BBK Off-Road H-pipe,BBK jet-hot coated equal length shorty headers,BBK 70mm Throttle Body,BBK adjustable clutch quadrant,C & L 76mm Mass air meter,Cobra R's 17x9 w/ 245's,Trick Flow Intake,Flowmaster Force II exhaust system, Super Duty T5,Centerforce II Clutch,Heavy Duty Radiator,9mm Ford racing plug wires,Accel cap and Rotor http://www.geocities.com/i8urvpr/JM.html?987369348700

06-04-2001, 08:15 PM	#12
SisuStang Guest Posts: n/a	Actually, if you want to stay within Canada, J&P Performance sells hoods that are of excelent quality. Give them a call at 416-751-9766 for prices. ------------------ 91 coupe 3.73's,long tubes,2 1/2" exh,ported stock t-body,ProM-77mm cobra intake,edelbrock heads,B303,1.72 rr's 36lb inj's,tremec, & a Paxton NOVI 2000!!! 11.020 @128.95 on BFG Drag Radials (275/60/15)