Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-31-2005, 07:34 PM
|
#1 |
|
Registered Member
Join Date: May 2004
Location: Tennessee
Posts: 21
|
408 for 550FWHP, Can it be done?
I am gathering parts for a 408 for a Fox
My goals: 550 Flywheel 6500 Redline Emissions Legal (they just started this in my County Confused) Moderate Streetability as will be a daily driver (Dont care about "low end torque", what lower gears for right?) Part I Already Have and Want to use: SVO N-351 Heads (2.05/1.60 Valves, Isky Springs, CNC-ed, 275/225CFM) F303 Cam Parts I am considering getting 1-7/8 Longtubes Headers, (Hoping to find some bolt ons for the n351 heads if they exist) Catted X-pipe? 3" all the way back? Edelbrock Performer 800CFM Carburetor $350 http://store.summitracing.com/partde...art=EDL%2D1413 SBC Eagle 6.200" Connecting Rods $250 http://www.adperformance.com/index.p...roducts_id=567 Edelbrock Victor Jr. Intake Manifold $300 http://store.summitracing.com/partde...t=EDL%2D2980&N Eagle Cast 4.00 "408" Crankshaft $325 http://www.adperformance.com/index.p...roducts_id=358
__________________
306,Hyper Pistons,Edelbrock Performer RPM "Typhoon" Intake (Ported), 1969 351W Heads (ported) 60cc combustion chambers machined to 50cc, 10:1 Compression Ratio, F-303 Cam, Harland Sharp 1.6 Ratio Roller Rockers, A9L ECU, 70MM Cobra MAF, 24lb/hr Injectors, MAC Equal Length Headers, MAC Offroad H-Pipe with Flowmaster Mufflers, 3.55 Posi Rearend...dreaming of 12s, need to run it |
|
|
|
|