i need heads

thejman · 12-20-2005, 10:38 PM

does anyone have a set of heads they would sell for reasonable price either stock or aftermarket for a 302

82 GT · 12-20-2005, 10:58 PM

What's a reasonable price?

thejman · 12-20-2005, 11:02 PM

i am looking for the 500-700 dollar range

~The Jester~ · 12-21-2005, 12:45 AM

Ebay! Look for "Windsor Jr." Iron is OK on these heads. I had a set, and WOW!

thejman · 12-21-2005, 01:12 AM

what do you think of tristate cylinder heads they sell pro topline has anyone used any of these heads and if so good or bad results

fiveohpatrol · 12-21-2005, 04:10 PM

Quote:

Originally Posted by thejman

what do you think of tristate cylinder heads they sell pro topline has anyone used any of these heads and if so good or bad results

I've got the aluminum 200cc PTL's on my car, times in sig. I like them. If you're serious about it, I'd look into the 180cc version, but you're going to pay more than $700 for them

82 GT · 12-23-2005, 11:12 PM

Here you go..check out this page. A set of fresh windsor Jr's for $700
http://www.fordmuscle.com/classified...ad.php?id=3682

Gearhead999 · 12-21-2005, 01:08 PM

I have a good set of "stock" cylinder heads.

thejman · 12-21-2005, 03:28 PM

which ones e7s or others and how much

Gearhead999 · 12-24-2005, 02:56 PM

Yep, they are E7's. I think that shipping them will be $$$ because of the weight. I'm in Orlando, FL.

Rev · 12-26-2005, 05:44 PM

I have a set of 351W heads that I ran for several years on my 306 engine. The only reason that they were removed was because I wanted TFTW aluminum heads.

The 351W heads were used for about 20,000-25,000 miles over a 4 year period. These heads are professionally pocket ported and gasket matched with a 3 angle valve job. The valves measure 1.85 intake/ 1.55 exhaust. The heads were angle milled to produce a 59.5 cc chamber. With flat top pistons that should make 9.5/1 CR on the 302. These heads also include Comp Cams 1.6 ratio roller tip Magnum rocker arms ($139 value new).

About a year ago, I thought I had the heads sold. At that time, I took them back to the shop that built them originally. They were disassembled, cleaned, and inspected at that time. No problems were found. They did do a touch up vave job just because they had them apart.

I would sell these heads for $400 + shipping. Pm me for further questions if interested. BTW. I think my 306 made approximately 300 HP with these heads.

Rev

~The Jester~ · 12-26-2005, 08:10 PM

Just my $.02, that's a KILLER deal. You'd have twice that in building them.

82 GT · 12-26-2005, 09:35 PM

Yeah, but there're stock sized valves. I would look for something with at least 1.94/1.60 valves.
Sorry REV, I'm not trying to screw you out of a sale....just stating my opinion.
I would either buy those Windsor Jr. heads I showed the link for or save your money for a nice aftermarket set of heads.

That's what happened to me....I was all excited two years ago to get my engine built, I didn't have about $1500 for aluminum heads so I spent $700 on my stock 351 heads getting them ported, polished and 1.94/1.60 valves installed. If I would have been patient and saved another $700, I could of had the aluminum heads.
Now, I'm at the crossroads where I need better flowing heads and the saving process starts all over again for heads.....that I should of had two years ago.
Take some good advise by saving and buying the aftermarket heads NOW instead of wishing you would have done it a long time ago.

12-20-2005, 10:38 PM	#1
thejman Registered Member Join Date: Sep 2005 Location: birmingham,AL Posts: 20	i need heads does anyone have a set of heads they would sell for reasonable price either stock or aftermarket for a 302

12-20-2005, 10:58 PM	#2
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Re: i need heads What's a reasonable price? __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

12-20-2005, 11:02 PM	#3
thejman Registered Member Join Date: Sep 2005 Location: birmingham,AL Posts: 20	Re: i need heads i am looking for the 500-700 dollar range

12-21-2005, 12:45 AM	#4
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: i need heads Ebay! Look for "Windsor Jr." Iron is OK on these heads. I had a set, and WOW! __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

12-21-2005, 01:12 AM	#5
thejman Registered Member Join Date: Sep 2005 Location: birmingham,AL Posts: 20	Re: i need heads what do you think of tristate cylinder heads they sell pro topline has anyone used any of these heads and if so good or bad results

12-23-2005, 11:12 PM	#7
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Re: i need heads Here you go..check out this page. A set of fresh windsor Jr's for $700 http://www.fordmuscle.com/classified...ad.php?id=3682 __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

12-21-2005, 01:08 PM	#8
Gearhead999 Registered Member Join Date: Sep 1998 Location: Oviedo, FL Posts: 992	Re: i need heads I have a good set of "stock" cylinder heads. __________________ "Support our Troops" Dave 1968 Cougar 2004 Thunderbird 2007 F150 Harley-Davidson, SuperCrew 1986 LTD 1997 Ranger 1992 Honda Civic

12-21-2005, 03:28 PM	#9
thejman Registered Member Join Date: Sep 2005 Location: birmingham,AL Posts: 20	Re: i need heads which ones e7s or others and how much

12-24-2005, 02:56 PM	#10
Gearhead999 Registered Member Join Date: Sep 1998 Location: Oviedo, FL Posts: 992	Re: i need heads Yep, they are E7's. I think that shipping them will be $$$ because of the weight. I'm in Orlando, FL. __________________ "Support our Troops" Dave 1968 Cougar 2004 Thunderbird 2007 F150 Harley-Davidson, SuperCrew 1986 LTD 1997 Ranger 1992 Honda Civic

12-26-2005, 05:44 PM	#11
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	Re: i need heads I have a set of 351W heads that I ran for several years on my 306 engine. The only reason that they were removed was because I wanted TFTW aluminum heads. The 351W heads were used for about 20,000-25,000 miles over a 4 year period. These heads are professionally pocket ported and gasket matched with a 3 angle valve job. The valves measure 1.85 intake/ 1.55 exhaust. The heads were angle milled to produce a 59.5 cc chamber. With flat top pistons that should make 9.5/1 CR on the 302. These heads also include Comp Cams 1.6 ratio roller tip Magnum rocker arms ($139 value new). About a year ago, I thought I had the heads sold. At that time, I took them back to the shop that built them originally. They were disassembled, cleaned, and inspected at that time. No problems were found. They did do a touch up vave job just because they had them apart. I would sell these heads for $400 + shipping. Pm me for further questions if interested. BTW. I think my 306 made approximately 300 HP with these heads. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

12-26-2005, 08:10 PM	#12
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: i need heads Just my $.02, that's a KILLER deal. You'd have twice that in building them. __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

12-26-2005, 09:35 PM	#13
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Re: i need heads Yeah, but there're stock sized valves. I would look for something with at least 1.94/1.60 valves. Sorry REV, I'm not trying to screw you out of a sale....just stating my opinion. I would either buy those Windsor Jr. heads I showed the link for or save your money for a nice aftermarket set of heads. That's what happened to me....I was all excited two years ago to get my engine built, I didn't have about $1500 for aluminum heads so I spent $700 on my stock 351 heads getting them ported, polished and 1.94/1.60 valves installed. If I would have been patient and saved another $700, I could of had the aluminum heads. Now, I'm at the crossroads where I need better flowing heads and the saving process starts all over again for heads.....that I should of had two years ago. Take some good advise by saving and buying the aftermarket heads NOW instead of wishing you would have done it a long time ago. __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help I need heads!!	SmokinStangGT	Windsor Power	18	05-04-2003 10:05 PM
New FRP Heads for 96 - 98 4.6	surfbeast	Modular Madness	9	11-21-2002 07:02 PM
will 99-2002 cams out of the pi heads fit in the 96-98 stock heads	slow98	Modular Madness	6	10-25-2002 04:28 PM
GT-40 heads	5.0 Pony	Windsor Power	1	09-10-2002 10:26 PM
Which heads are beter?	patman	Classic Mustangs	3	12-02-1999 03:42 AM