throttle body for '88 speed density

nerpall · 08-07-2001, 09:03 PM

What 65 mm throttle body can I use for an '88 GT 5.0 with speed density. I wanted to avoid a mass air conversion but still increase the throttle body and EGR spacer. What do I need to look for when ordering these parts online?

Rick 91GT · 08-07-2001, 10:09 PM

I would look at the Accufabs, full polished billet aluminum bodies and supposedly outflow all others. I like mine nice quality piece cost me $250 with the matching spacer. The TB are the same for a Mass AIr and SD car.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

08-07-2001, 09:03 PM	#1
nerpall Registered Member Join Date: Aug 2001 Location: Hoffman Estates, IL Posts: 14	throttle body for '88 speed density What 65 mm throttle body can I use for an '88 GT 5.0 with speed density. I wanted to avoid a mass air conversion but still increase the throttle body and EGR spacer. What do I need to look for when ordering these parts online?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Throttle Body & Idle Conrol Valve Info	BigBobsL	Windsor Power	2	02-10-2004 01:16 AM
Idle problem 88GT Speed Density	chuck88	Windsor Power	9	07-07-2002 09:16 AM
Bbk/edelbrock Throttle Body Sticking	sn95gt19	Windsor Power	4	06-25-2002 02:01 PM
EFI conversion with Speed Density and a 351w?	PSI GUY	Windsor Power	2	12-02-2001 11:13 PM
Throttle Body	96Saleen	Modular Madness	1	08-22-2001 11:00 AM

08-07-2001, 10:09 PM	#2
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	I would look at the Accufabs, full polished billet aluminum bodies and supposedly outflow all others. I like mine nice quality piece cost me $250 with the matching spacer. The TB are the same for a Mass AIr and SD car. ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP