Have you guys broke a header?I need a stock 5.0 header

SKYWLKR · 09-01-2001, 06:12 PM

we broke the header on my girlfriends car putting her cat X-pipe on.

is this common?:-)

If Any one has one in the Baton Rouge area I will Gladly come get it just E-mail and we can make a rangements.

I may have to get one shipped.if so E-amil again.

------------------
A.K.A. The LS1 Eater http://members.aol.com/jeauxmoe/index.html 5.0 lx,performer heads, GT-40 intake,JBA headers,stock cam and TB to name a few. 12.3@111.7 w/a 1.70 60ft 13.002 @109.8 on street tires w/a 1.96* 60 ft.

Update 11.89@115 1.63 60ft on a small shot of gas.

Now it's unnaturall 10psi from an S-trim= 12.0's @122 on street tires and pump gas.

BowTie Eater 5 Liter · 09-01-2001, 07:35 PM

i have stock headers. if ya need em, make an offer

------------------
1988 Mustang GT, T-5
3.08's, No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe, K&N Air Filter (Stock Air Box), Removed Air SilencerMy Stang
My Site (Not Done Yet)

ARMYMANUS · 09-01-2001, 08:35 PM

well my friend needs a left header, for a 5.0 85, if you have one give me a holler, n tell me how much you want for 1.

2FastLX · 09-01-2001, 08:47 PM

I wish I had kept mine now. They ended up in a dumpster.

If you're going through the trouble of replacing a stock header why not go ahead and by some aftermarket shorties at least?

------------------
Gunning for 12's!

Buy your parts here
ICQ# 42269241

Five0 · 09-01-2001, 10:07 PM

which side and what year?

Did you try to take it to a muffler shop because they can just weld it back probably for under $20?

Just a thought!

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

09-01-2001, 06:12 PM	#1
SKYWLKR Registered Member Join Date: May 1999 Posts: 103	Have you guys broke a header?I need a stock 5.0 header we broke the header on my girlfriends car putting her cat X-pipe on. is this common?:-) If Any one has one in the Baton Rouge area I will Gladly come get it just E-mail and we can make a rangements. I may have to get one shipped.if so E-amil again. ------------------ A.K.A. The LS1 Eater http://members.aol.com/jeauxmoe/index.html 5.0 lx,performer heads, GT-40 intake,JBA headers,stock cam and TB to name a few. 12.3@111.7 w/a 1.70 60ft 13.002 @109.8 on street tires w/a 1.96* 60 ft. Update 11.89@115 1.63 60ft on a small shot of gas. Now it's unnaturall 10psi from an S-trim= 12.0's @122 on street tires and pump gas.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how fast have you guys gone with a stock motor	tireburner163	Windsor Power	39	01-16-2002 08:09 AM
Underhood Conical K&N vs. Stock Airbox with K&N	jimberg	Windsor Power	11	08-31-2001 02:36 PM
What exhaust systems do the trophy stock guys run?	TJR	Windsor Power	4	08-03-2001 04:55 PM
Any "Pro Stock" motor guys out there?	Nitrous Al	Windsor Power	12	07-13-2001 07:22 PM
LT's vs. shorties vs. stock headers	jonnyk	Windsor Power	9	01-01-2001 11:28 AM

09-01-2001, 07:35 PM	#2
BowTie Eater 5 Liter Registered Member Join Date: Nov 2000 Location: Maple Ridge B.C. Canada, The Best Place In The World Posts: 871	i have stock headers. if ya need em, make an offer ------------------ 1988 Mustang GT, T-5 3.08's, No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe, K&N Air Filter (Stock Air Box), Removed Air SilencerMy Stang My Site (Not Done Yet)

09-01-2001, 08:35 PM	#3
ARMYMANUS Registered Member Join Date: Jun 2001 Location: alamogordo,nm,usa Posts: 23	well my friend needs a left header, for a 5.0 85, if you have one give me a holler, n tell me how much you want for 1.

09-01-2001, 08:47 PM	#4
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	I wish I had kept mine now. They ended up in a dumpster. If you're going through the trouble of replacing a stock header why not go ahead and by some aftermarket shorties at least? ------------------ Gunning for 12's! Buy your parts here ICQ# 42269241

09-01-2001, 10:07 PM	#5
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	which side and what year? Did you try to take it to a muffler shop because they can just weld it back probably for under $20? Just a thought! ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft