Where to get TFS intake gaskets?

gt93mustang · 02-04-2001, 12:59 PM

I finally picked up a street heat intake and noticed the port pattern between the upper and the lower. I haven't seen one like this before, and was curious if I had to go back to TFS every time I need a new upper gasket? or if by some off chance, I can pick one up from a local parts store. I remove my intake quite often, and don't want to have to wait two weeks everytime for a new gasket. Thanks in advance.

------------------
MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

SaleenGTS · 02-04-2001, 05:09 PM

Yes, you can get them from Summit, or any TFS dealer. You shouldn't have to replace them though for a long time

------------------
Dustin
1990 Saleen GTSport #14
TFS Street Heat Upper & Lower,TFS TW heads,Phenolic Spacer, E303 Cam,1.6 RR,BBK 70mm TB,FMS 70mm MAF,MAC 1 5/8" Equals,Dynomax 2 1/2" cat back,Bassani 2 1/2" X-Pipe,MSD 6AL Ignition, Home made Ram Air, Racecraft Suspension

60ft: 2.158
660ft: 8.271 @ 90.43
¼ mi: 12.791@ 111.04 on 26X8 Slicks with Cobra Intake, Stock TB, on a 65* night. New Best.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Porting lower intake?? Velocity vs. Flow	Dark_5.0	Windsor Power	1	11-11-2002 02:42 AM
Speed Secret # 3	jim_howard_pdx	Windsor Power	13	11-09-2002 10:35 AM
which gaskets to run with Holley intake edelbrock heads	NewAge 5.0	Windsor Power	3	01-26-2002 04:38 PM
TFS intake gaskets???	DemonGT	Windsor Power	2	05-22-2001 02:59 PM
Head Gaskets, Header Gaskets, Intake Gaskets, etc	AxemanZZ	Windsor Power	8	01-11-2001 01:09 PM

02-04-2001, 12:59 PM	#1
gt93mustang Registered Member Join Date: Feb 1999 Location: Kennesaw, Georgia, USA Posts: 252	Where to get TFS intake gaskets? I finally picked up a street heat intake and noticed the port pattern between the upper and the lower. I haven't seen one like this before, and was curious if I had to go back to TFS every time I need a new upper gasket? or if by some off chance, I can pick one up from a local parts store. I remove my intake quite often, and don't want to have to wait two weeks everytime for a new gasket. Thanks in advance. ------------------ MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

02-04-2001, 05:09 PM	#2
SaleenGTS RICE taste like Chicken Join Date: Jun 2000 Location: Edmond, OK Posts: 687	Yes, you can get them from Summit, or any TFS dealer. You shouldn't have to replace them though for a long time ------------------ Dustin 1990 Saleen GTSport #14 TFS Street Heat Upper & Lower,TFS TW heads,Phenolic Spacer, E303 Cam,1.6 RR,BBK 70mm TB,FMS 70mm MAF,MAC 1 5/8" Equals,Dynomax 2 1/2" cat back,Bassani 2 1/2" X-Pipe,MSD 6AL Ignition, Home made Ram Air, Racecraft Suspension 60ft: 2.158 660ft: 8.271 @ 90.43 ¼ mi: 12.791@ 111.04 on 26X8 Slicks with Cobra Intake, Stock TB, on a 65* night. New Best.