Buying cam, Need suggestions and info! Ordering tomarrow

93CobraR · 03-10-2001, 06:41 PM

Thanks to all that reply. I have decided to throw a cam in my car this week. I need suggestions. I don't have to worry about emmisions or anything. Gas cunsumption is not a problem. I want the biggest best cam that I can put in my car. The basics that you need to know is I have ported GT-40's, Cobra 1.7's rockers, and I will be running Holleys intake. I need to know that your almost positive that the cam you suggest will clear the pistons. Thanks everyone..

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 13.012
Best MPH 104
Best 60' 1.816

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

Five0 · 03-10-2001, 09:14 PM

What size valves?

93CobraR · 03-11-2001, 12:17 AM

Not sure. there stock FMS Gt-40 irons.

03-10-2001, 06:41 PM	#1
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	Buying cam, Need suggestions and info! Ordering tomarrow Thanks to all that reply. I have decided to throw a cam in my car this week. I need suggestions. I don't have to worry about emmisions or anything. Gas cunsumption is not a problem. I want the biggest best cam that I can put in my car. The basics that you need to know is I have ported GT-40's, Cobra 1.7's rockers, and I will be running Holleys intake. I need to know that your almost positive that the cam you suggest will clear the pistons. Thanks everyone.. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 13.012 Best MPH 104 Best 60' 1.816 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html

03-10-2001, 09:14 PM	#2
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	What size valves?

03-11-2001, 12:17 AM	#3
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	Not sure. there stock FMS Gt-40 irons.