In need of quick desperate help.

restorin88stang · 12-02-2001, 04:23 PM

Ok, i had a guy change my 4 cyl to a 302 8 cyl but he does know what the neutral safety switch combo is...theres like 12 wires and its a combo of 3...i need to know what the 3 are cuz until then i cant get my car to start

I hope this is clear enough for someone to understand.

Unit 5302 · 12-02-2001, 09:18 PM

auto or stick?

restorin88stang · 12-02-2001, 10:57 PM

It's an automatic

PKRWUD · 12-03-2001, 04:07 AM

I'd love to help you, but I don't understand what you're asking for.

mustangman65_79 · 12-03-2001, 07:23 AM

YOU CAN'T JUST BUY A NEW SWITCH THAT WILL PLUG IN??? Hmmmmmmmm, this could make it fun. Well, u have the back up lights, that will be easy to find, on my Bronco my park and neutal postions had differernt wires, but the best way is to look at your old switch, take it apart, then see what conected to what. If push comes to shove, then just hook up your old switch and glue it in the neutral position. Or u could always put in a manual.

PKRWUD · 12-03-2001, 07:41 AM

I'm still not sure what you're asking, because the neutral safety switch in your car with an auto should only have 4 wires:
White/Lt Pink and Red/Lt Blue go to the neutral safety switch itself, and the Black/Pink and Purple/Orange wires go to the backup lamp switch.

Take care,
-Chris

mustangman65_79 · 12-03-2001, 07:46 AM

Ford had some odd things in '88 and '89 with those switches. My '89 Bronco had a switch that even Ford counldn't find a part for, I ened up fixing my own switch. It has 6 or 8 wires, when all the others had 3 or 4. I wouldn'd dought that his is different. But 12? Not sure.

faststang90 · 12-03-2001, 08:20 AM

not sure if this is what u need but if u pull your drivers seat out and pull the carpet up your transmission wires plug in there. just go get the 1 you need for your tranny

mustangman65_79 · 12-03-2001, 08:39 AM

He He, my spelling sucks today.

restorin88stang · 12-03-2001, 08:53 AM

Ok, the question was since my car wont start with turning the egniction...i need help finding out the nuetral safety switch.

mustangman65_79 · 12-03-2001, 09:11 AM

OIC, u don't know where it is, follow your tranny linkage from your shifter down to where it connects to your tranny, right there should be a switch, about half-moon in shape, you'll need to take off your linkage to get to it.

restorin88stang · 12-03-2001, 09:33 AM

I know where it is...but the guy said theres about 12 wires and i called and the place told me i need to twist three wires togheter to get it to work...i need to know which wires it is...or if theres any other way to get it to work....

restorin88stang · 12-03-2001, 09:18 PM

Please...i really need to know this...

PKRWUD · 12-04-2001, 03:02 AM

List all of the wire colors, and I'll figure it out for you. Be specific, though!

Take care,
-Chris

mustangman65_79 · 12-04-2001, 06:07 AM

So there is no way to get your old switch and plug it in and just move it out of the way??? If PKRWUD can't fiqure it out, then I think it's up to a guessing game, get a friend to help. U do know u can bypass this switch right??? I had to do it on my Bronco. Just turn on the key, open your hood, and crank over your starter by using the starter silinoid(can spell) As long as the key is on, the car should start. If u don't know how to do this, I'll try to explain. On your silinoid there should be only three posts on it. One goes to your batt, onther goes to your starter, the third, and smallest one, goes to your tranny and key. When u turn your key to start, it goes through your tranny switch, then the silinoid. Since your switch is disconnected, then u must make your on route. All u have to do is take something metal, say an old screwdriver, and connect it from the batt post to your smaller post, this will close the silinoid, sending power to your stater, and if your key is on, start your car. U can do this all the time if needed, but it looks stupid doing it, but if u need to drive it, do it this way. If you have four posts, then the one to use will be the one with only one red wire going to it(should be one Red wire). Plz let know know if u have any probs.

restorin88stang · 12-04-2001, 01:10 PM

When i get home ill crawl under the car and tell you the 12 car wire colors...and thanks for the silinod help.

mustangman65_79 · 12-06-2001, 07:03 AM

Did the silinoid(still can't spell) idea work????

restorin88stang · 12-06-2001, 08:47 AM

Yea...Thats what im using...Can i use that all the time or will it mess up?

mustangman65_79 · 12-13-2001, 06:07 AM

As Long as it's not in gear, and u don't ground out the positive on anything else, it won't hurt it.

12-02-2001, 04:23 PM	#1
restorin88stang Registered Member Join Date: Nov 2001 Location: Michigan Posts: 13	In need of quick desperate help. Ok, i had a guy change my 4 cyl to a 302 8 cyl but he does know what the neutral safety switch combo is...theres like 12 wires and its a combo of 3...i need to know what the 3 are cuz until then i cant get my car to start I hope this is clear enough for someone to understand.

12-03-2001, 04:07 AM	#4
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	I'd love to help you, but I don't understand what you're asking for. __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

12-03-2001, 07:23 AM	#5
mustangman65_79 My poor 79 RIP Join Date: Oct 2001 Location: Suisun City, Posts: 2,320	YOU CAN'T JUST BUY A NEW SWITCH THAT WILL PLUG IN??? Hmmmmmmmm, this could make it fun. Well, u have the back up lights, that will be easy to find, on my Bronco my park and neutal postions had differernt wires, but the best way is to look at your old switch, take it apart, then see what conected to what. If push comes to shove, then just hook up your old switch and glue it in the neutral position. Or u could always put in a manual. __________________ '84 mustang GT turbo '85 LTD '89 Camaro Irocz z28 '94 Lightning '96 Trans am

12-03-2001, 07:41 AM	#6
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	I'm still not sure what you're asking, because the neutral safety switch in your car with an auto should only have 4 wires: White/Lt Pink and Red/Lt Blue go to the neutral safety switch itself, and the Black/Pink and Purple/Orange wires go to the backup lamp switch. Take care, -Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

12-03-2001, 07:46 AM	#7
mustangman65_79 My poor 79 RIP Join Date: Oct 2001 Location: Suisun City, Posts: 2,320	Ford had some odd things in '88 and '89 with those switches. My '89 Bronco had a switch that even Ford counldn't find a part for, I ened up fixing my own switch. It has 6 or 8 wires, when all the others had 3 or 4. I wouldn'd dought that his is different. But 12? Not sure. __________________ '84 mustang GT turbo '85 LTD '89 Camaro Irocz z28 '94 Lightning '96 Trans am

12-02-2001, 09:18 PM	#2
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	auto or stick?

12-02-2001, 10:57 PM	#3
restorin88stang Registered Member Join Date: Nov 2001 Location: Michigan Posts: 13	It's an automatic

12-03-2001, 08:20 AM	#8
faststang90 Registered Member Join Date: May 2001 Location: baytown,tx,us Posts: 128	not sure if this is what u need but if u pull your drivers seat out and pull the carpet up your transmission wires plug in there. just go get the 1 you need for your tranny

12-03-2001, 08:39 AM	#9
mustangman65_79 My poor 79 RIP Join Date: Oct 2001 Location: Suisun City, Posts: 2,320	He He, my spelling sucks today. __________________ '84 mustang GT turbo '85 LTD '89 Camaro Irocz z28 '94 Lightning '96 Trans am

12-03-2001, 08:53 AM	#10
restorin88stang Registered Member Join Date: Nov 2001 Location: Michigan Posts: 13	Ok, the question was since my car wont start with turning the egniction...i need help finding out the nuetral safety switch.

12-03-2001, 09:11 AM	#11
mustangman65_79 My poor 79 RIP Join Date: Oct 2001 Location: Suisun City, Posts: 2,320	OIC, u don't know where it is, follow your tranny linkage from your shifter down to where it connects to your tranny, right there should be a switch, about half-moon in shape, you'll need to take off your linkage to get to it. __________________ '84 mustang GT turbo '85 LTD '89 Camaro Irocz z28 '94 Lightning '96 Trans am

12-03-2001, 09:33 AM	#12
restorin88stang Registered Member Join Date: Nov 2001 Location: Michigan Posts: 13	I know where it is...but the guy said theres about 12 wires and i called and the place told me i need to twist three wires togheter to get it to work...i need to know which wires it is...or if theres any other way to get it to work....

12-03-2001, 09:18 PM	#13
restorin88stang Registered Member Join Date: Nov 2001 Location: Michigan Posts: 13	Please...i really need to know this...

12-04-2001, 03:02 AM	#14
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	List all of the wire colors, and I'll figure it out for you. Be specific, though! Take care, -Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

12-04-2001, 06:07 AM	#15
mustangman65_79 My poor 79 RIP Join Date: Oct 2001 Location: Suisun City, Posts: 2,320	So there is no way to get your old switch and plug it in and just move it out of the way??? If PKRWUD can't fiqure it out, then I think it's up to a guessing game, get a friend to help. U do know u can bypass this switch right??? I had to do it on my Bronco. Just turn on the key, open your hood, and crank over your starter by using the starter silinoid(can spell) As long as the key is on, the car should start. If u don't know how to do this, I'll try to explain. On your silinoid there should be only three posts on it. One goes to your batt, onther goes to your starter, the third, and smallest one, goes to your tranny and key. When u turn your key to start, it goes through your tranny switch, then the silinoid. Since your switch is disconnected, then u must make your on route. All u have to do is take something metal, say an old screwdriver, and connect it from the batt post to your smaller post, this will close the silinoid, sending power to your stater, and if your key is on, start your car. U can do this all the time if needed, but it looks stupid doing it, but if u need to drive it, do it this way. If you have four posts, then the one to use will be the one with only one red wire going to it(should be one Red wire). Plz let know know if u have any probs. __________________ '84 mustang GT turbo '85 LTD '89 Camaro Irocz z28 '94 Lightning '96 Trans am

12-04-2001, 01:10 PM	#16
restorin88stang Registered Member Join Date: Nov 2001 Location: Michigan Posts: 13	When i get home ill crawl under the car and tell you the 12 car wire colors...and thanks for the silinod help.

12-06-2001, 07:03 AM	#17
mustangman65_79 My poor 79 RIP Join Date: Oct 2001 Location: Suisun City, Posts: 2,320	Did the silinoid(still can't spell) idea work???? __________________ '84 mustang GT turbo '85 LTD '89 Camaro Irocz z28 '94 Lightning '96 Trans am

12-06-2001, 08:47 AM	#18
restorin88stang Registered Member Join Date: Nov 2001 Location: Michigan Posts: 13	Yea...Thats what im using...Can i use that all the time or will it mess up?

12-13-2001, 06:07 AM	#19
mustangman65_79 My poor 79 RIP Join Date: Oct 2001 Location: Suisun City, Posts: 2,320	As Long as it's not in gear, and u don't ground out the positive on anything else, it won't hurt it. __________________ '84 mustang GT turbo '85 LTD '89 Camaro Irocz z28 '94 Lightning '96 Trans am

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
About how quick can i run the 1/4?	yelowjaket	Stang Stories	12	04-30-2003 06:26 PM
Need Advise ASAP Gonna order Hoosier Quick Time Pro's Tommorow	Mustang_GT_90	Windsor Power	1	08-12-2002 06:58 AM
Quick little ricer!	bstang46	Stang Stories	0	11-09-2001 03:40 PM
Need quick answers...T5 mounts???	Mad Horse	Windsor Power	4	04-12-2001 07:51 PM