4 cylinder to 5.0 EFI swap

shelby_5_0 · 04-30-2001, 06:26 PM

I need any help with website links or literature references on swapping a 4 cylinder from a 87-93 mustang with a 87-93 5.0. thanks for any help

NOS_Notch · 04-30-2001, 08:09 PM

i just had a back issue of MM&FF that did the whole walk-through.
e-mail me and i will tell you the issue(it's in my wifes jeep right now and i'll forget)
Also "painless wiring" makes a harness now for carb to efi or i'm sure 4 cyl-5.0.
It's about $450 though.

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com

11's coming soon!!!!
Heads,intake and cam are all here

LX XLR8R · 05-01-2001, 10:24 AM

whatever questions you come along feel free to email me..i just did one..

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

04-30-2001, 06:26 PM	#1
shelby_5_0 Registered Member Join Date: Apr 2001 Posts: 5	4 cylinder to 5.0 EFI swap I need any help with website links or literature references on swapping a 4 cylinder from a 87-93 mustang with a 87-93 5.0. thanks for any help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rocker adjustment	zach0	Classic Mustangs	3	04-24-2004 12:28 PM
Cylinder head swap	86pony	Windsor Power	4	09-09-2001 11:12 PM
Cylinder Head Swap	Fostang	Windsor Power	0	05-05-2001 09:51 PM
4 cylinder to 5.0 swap	shelby_5_0	Windsor Power	2	04-18-2001 09:22 PM
4 cylinder to 5.0 swap	shelby_5_0	Blue Oval Lounge	2	04-18-2001 09:22 PM

04-30-2001, 08:09 PM	#2
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	i just had a back issue of MM&FF that did the whole walk-through. e-mail me and i will tell you the issue(it's in my wifes jeep right now and i'll forget) Also "painless wiring" makes a harness now for carb to efi or i'm sure 4 cyl-5.0. It's about $450 though. ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.webprovider.com 11's coming soon!!!! Heads,intake and cam are all here

05-01-2001, 10:24 AM	#3
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	whatever questions you come along feel free to email me..i just did one.. ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch