

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: May 2001
Location: Oklahoma City OK USA
Posts: 236
|
![]() If your looking at the intake from the front and you look under the runners there are 2 hoses. well, what is the hose on the left? it runs to some metal cylinder and then to the charcoal canister(i think). That hose burned up in my little alternator fire several weeks ago. I was wondering if i could disconnect that hose from the intake and put a plastic cap over the nipple on he intake. What should i do about the side that runs to the little metal thing and the charcoal can. I dont have an air pump and i dont have to worry about smog inspection. can i just trsh all of the stuff connected to the charcoal can?
Also, there is a small metal tube that comes out from around behind the block on the passenger side. I think its connected to the heads and i think it may have run to the air pump. Well, whats the best way to close it off? I have been driving around for a while with it open and i am getting tired of the exhaust leak sound. should i pinch the end and then mig weld it closed? thanks, Adam
__________________
90 GT 25th Anni. Did the AOD to T-5 swap, SPEC clutch, Steeda Tri-Ax shifter, BBK 2½ inch off-road H pipe, Flows, BBK 70mm TB/EGR, Ford Racing aluminim driveshaft, 3.55's, welded subframes, Ram Air, 3 core radiator, NOS dry kit 75 shot, and a K&N filter. 12.9 @ 108 |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
stock GT40 head intake runner opening | mak375 | Windsor Power | 2 | 04-07-2003 09:14 PM |
cobra intake on stock heads?? | scale | Windsor Power | 1 | 04-04-2003 02:51 PM |
Is the stock intake a bottleneck for a street only setup? | Fox Hound | Windsor Power | 6 | 01-03-2003 03:30 PM |
stock intake removal? - Carb | autoX | Windsor Power | 2 | 02-01-2001 01:30 PM |
Trick Flow "R" Intake on a stock 88 5.0??? | BowTie Eater 5 Liter | Windsor Power | 3 | 01-15-2001 09:44 AM |