Crane 2031 cam and Edelbrock intakes on, impressions.....

93CobraR · 05-22-2001, 09:38 PM

Well, I just got new Crane Compucam 2031 and Edelbrock intake installed after having the car down for weeks. After I got it all on I went to fire it up and it wouldn't start, only took me a sec to figure I had it 180 degrees out, fixed that and it started right up. It idles perfect with no adjustments. Everything looks good, with no leaks. All I have to do is take my valve covers back off and re-adjust my POS Crane rockers since a few of them are making some noise. I took it out and man what a differance, the thing pulls so much harder clear to 6000. Can;t wait to get to the track, since my last run in my sig, I have added the cam, intake, and deleted the smog pump, what do you guys think it will run now? I'm going to the track friday. Also I haven't adjusted my fuel pressure yet, I'm still running 19lbs. injectors and it's running fine, I will try more fuel tomarrow.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 12.96
Best MPH 103.42
Best 60' 1.695

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

05-22-2001, 09:38 PM	#1
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	Crane 2031 cam and Edelbrock intakes on, impressions..... Well, I just got new Crane Compucam 2031 and Edelbrock intake installed after having the car down for weeks. After I got it all on I went to fire it up and it wouldn't start, only took me a sec to figure I had it 180 degrees out, fixed that and it started right up. It idles perfect with no adjustments. Everything looks good, with no leaks. All I have to do is take my valve covers back off and re-adjust my POS Crane rockers since a few of them are making some noise. I took it out and man what a differance, the thing pulls so much harder clear to 6000. Can;t wait to get to the track, since my last run in my sig, I have added the cam, intake, and deleted the smog pump, what do you guys think it will run now? I'm going to the track friday. Also I haven't adjusted my fuel pressure yet, I'm still running 19lbs. injectors and it's running fine, I will try more fuel tomarrow. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 12.96 Best MPH 103.42 Best 60' 1.695 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html