Tremec Bolts

Cody2552 · 02-10-2003, 11:29 PM

Okay since i blew my wimpy T5. i know have a tremec 3550. the only thing wrong with this is that i have no bolts that connect the used bellhousing i bought for the swap to connect the the actual transmission. please help on the size and how long , thanx

Cody

cyberstang5.0 · 02-11-2003, 08:15 AM

Well, I have a TKO tranny with a Lakewood scatter sheild. I used 4x 5/8" bolts that are about 1" long. I opted for the grade 8 bolts for the extra strength. If you have some bolts laying around, find one with the correct bolt patter/size and take it up to the hardware store and find new bolts of that size. Or even take the bell houseing up with you

02-10-2003, 11:29 PM	#1
Cody2552 Registered Member Join Date: Nov 2002 Posts: 68	Tremec Bolts Okay since i blew my wimpy T5. i know have a tremec 3550. the only thing wrong with this is that i have no bolts that connect the used bellhousing i bought for the swap to connect the the actual transmission. please help on the size and how long , thanx Cody

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Only 3 bolts holding fan to water pump?	Hethj7	Windsor Power	5	03-27-2003 03:26 PM
Pressure plate bolts	WhiteLX	Windsor Power	1	09-15-2002 06:50 AM
Console Armrest Bolts	Southpaw	Windsor Power	3	12-26-2001 09:56 AM
WTF? Ring gear bolts came loose and went threw Diff cover!	93CobraR	Windsor Power	6	11-07-2001 07:23 PM
Longtubes w a Tremec 3550?	fastang	Windsor Power	2	03-15-2001 07:43 PM

02-11-2003, 08:15 AM	#2
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	Well, I have a TKO tranny with a Lakewood scatter sheild. I used 4x 5/8" bolts that are about 1" long. I opted for the grade 8 bolts for the extra strength. If you have some bolts laying around, find one with the correct bolt patter/size and take it up to the hardware store and find new bolts of that size. Or even take the bell houseing up with you