Help with 1/4 mile times!!

[HiFlow5 0]

I just got back from the track tonight and I'm a little disappointed with my times. The following run is with all mods in sig except for underdrives. I am also running the stock fuel system but I have an adjustable FPR set to 42 psi, and timing was at 18* BTDC. (I actually picked up 1 tenth with upping the timing from 16* to 18*)

R/T....674
60'....2.146
330...5.788
1/8....8.816
MPH...81.11
1000..11.428
1/4.....13.632
MPH....102.24

My 60' still sucked, but wheel spin was not that bad. I think my AOD is contributing to my poor 60' times, or I'm not launching it hard enough.

Should I be running a higher fuel pressure? I ran some #'s though an analyzer and it says with the stock fuel system I should be running 51 psi, does that sound right? I'm heading back next week to race again, and I'm hoping after a little more tweaking I can pull a low 13 sec time. Any help here would be much appreciated!!

-Craig