wheels up launches

byrnech · 06-21-2001, 10:37 AM

i was just wondering if anyone had any suggestions on a susension combo that is known for good traction and produces wheels up launches.

byrnech · 06-21-2001, 10:46 AM

suspension combo

Rick 91GT · 06-21-2001, 04:01 PM

Mine does...

FRONT 70/30's, 50/50's, removed fron sway,eibach drag springs, skinnies.

REAR SSM lowers, soild uppers, Eiback drag kit w/ air bag.

8pt cage, subframes, fully welded torque boxes.

You also need a motor with enough power to pull the front end, along with good weight transfer.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

byrnech · 06-21-2001, 04:08 PM

Thanks alot for the info, sounds about like I was planning to do. My motor should have the HP to do it.

dinomite · 06-21-2001, 04:27 PM

Its called a wheelie, and you need good traction. What tires do you have Rick?

Rick 91GT · 06-21-2001, 09:17 PM

I was using 26" x 10.5" ET STREETS, they only have a 9.5" tread with, I am going to a set of 26" x 11.5". I still would love to bolt on a true slick and let the clutch fly though...

06-21-2001, 10:37 AM	#1
byrnech Registered Member Join Date: Jun 2001 Location: Anderson, TX. Posts: 166	wheels up launches i was just wondering if anyone had any suggestions on a susension combo that is known for good traction and produces wheels up launches.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheels and Tires...HELP !	Mass Stang	Blue Oval Lounge	6	09-04-2003 11:48 AM
Weld Racing Wheels/ Street Wheels	jmjett01	Modular Madness	0	03-07-2003 11:45 AM
15" Wheels on GT?	2000GT-5spd	Modular Madness	4	08-22-2002 12:08 PM
18" Mustang Wheels & Tires Selling Cheap!!!	steedamustang01	Modular Madness	0	05-15-2002 11:31 AM
wheels?	Lightspeed	Classic Mustangs	6	05-14-2002 10:10 PM

06-21-2001, 10:46 AM	#2
byrnech Registered Member Join Date: Jun 2001 Location: Anderson, TX. Posts: 166	suspension combo

06-21-2001, 04:01 PM	#3
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Mine does... FRONT 70/30's, 50/50's, removed fron sway,eibach drag springs, skinnies. REAR SSM lowers, soild uppers, Eiback drag kit w/ air bag. 8pt cage, subframes, fully welded torque boxes. You also need a motor with enough power to pull the front end, along with good weight transfer. ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

06-21-2001, 04:08 PM	#4
byrnech Registered Member Join Date: Jun 2001 Location: Anderson, TX. Posts: 166	Thanks alot for the info, sounds about like I was planning to do. My motor should have the HP to do it.

06-21-2001, 04:27 PM	#5
dinomite The Dude Join Date: Feb 2001 Location: Arlington, VA Posts: 1,262	Its called a wheelie, and you need good traction. What tires do you have Rick?

06-21-2001, 09:17 PM	#6
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	I was using 26" x 10.5" ET STREETS, they only have a 9.5" tread with, I am going to a set of 26" x 11.5". I still would love to bolt on a true slick and let the clutch fly though...