DYNO NUMBERS

[TEXSN95]

284 rwhp and 323 ftlbs!!!...its about 335 flywheel hp @ 389 ft lbs assuming a 15% loss.

Here's a breakdown:
1) 269 hp @ 5200 w/ 11.3 310 tq @ 3900 w/ 12.3 A/F with 41 psi FP
2) 275 hp @ 5400 w/ 11.7 313 tq @ 4000 w/ 12.6 w/ 38 psi
3) 278 hp @ 5400 w/ 12.3 311 tq @ 4200 w/ 12.9 w/ 35 35 psi
4) let it cool for 10 minutes
284 hp @ 5300 w/ 11.8 323 tq @ 4000 w/ 12.7 w/ 35psi

On all the runs the intake air temp was about 90 degrees...and it was awesome to hear it
scream all the way up to 6000. Needless to say I was pleased.

Needless to say it was 75 bux well spent.

------------------
Clint L.
White 95 Cobra #3637
58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW LCAs, Kenny Brown super subs, Steeda CC plates, aluminum driveshaft, Steeda quadrant, B&M ripper, Kirban FPR, MSD6A, Taylor wires, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s
13.61 @ 104.7 w/ 2.22