EGR Valve for a '93 LX 5.0L HO "Feature Car"

93LXJustForFun · 02-26-2007, 12:18 AM

Hi,

I'm having a difficult time locating an EGR valve for my '93 LX. It is one of the limited edition "Feature" cars produced by Ford. The OEM part number is F3AE-9F483-A2A. I have tried a few online sites (including fordparts.com) and some local parts places, but none of them can cross-reference the part number. NAPA Auto Parts had one that looked very close to the OEM part, however the base of the unit is too wide and will not bolt up to the EGR spacer. The EGR butts up to a bracket on one side and the NAPA part will not fit.

Any thoughts on where I could get some assistance or locate the part? Please excuse the post if this has been covered before or recently. This is the first time I have logged on to the board since 2003 (I have been a bit busy) and I'm getting ready to sell her after 10 years.

If it matters, here are some specifics on the car:
1993 LX Convertible
5.0L SFI HO (stock)
49,711 miles

Thanks!

goodyear1984 · 03-06-2007, 04:48 AM

hey worst come to worst get a different spacer with a egr on it...ebay is cheap

~The Jester~ · 03-06-2007, 07:52 AM

Have you tried your local Ford Dealer? If ANYONE can cross that part number, they can.

If it was me, that'd be my next stop.

goodyear1984 · 03-06-2007, 02:30 PM

hey try calling advanced auto if u havent already..they could cross parts for even my boat...there number is 585-865-2120

93LXJustForFun · 03-06-2007, 09:07 PM

Thanks for the replies. I ended up having to go through Ford. The problem is the old part number has been discontinued and is superseded by a new unit that also requires a new Position Sensor. Had to be ordered and is supposed to be in this Wednesday. Will end up costing me about $100 more than I cared to spend, but it is what it is. As long as the new part will fit in place of the old one, I will be good to go.

Cheers....

goodyear1984 · 03-11-2007, 10:27 PM

hey did u get that egr?how did it fit?

02-26-2007, 12:18 AM	#1
93LXJustForFun Registered Member Join Date: Oct 1998 Posts: 4	EGR Valve for a '93 LX 5.0L HO "Feature Car" Hi, I'm having a difficult time locating an EGR valve for my '93 LX. It is one of the limited edition "Feature" cars produced by Ford. The OEM part number is F3AE-9F483-A2A. I have tried a few online sites (including fordparts.com) and some local parts places, but none of them can cross-reference the part number. NAPA Auto Parts had one that looked very close to the OEM part, however the base of the unit is too wide and will not bolt up to the EGR spacer. The EGR butts up to a bracket on one side and the NAPA part will not fit. Any thoughts on where I could get some assistance or locate the part? Please excuse the post if this has been covered before or recently. This is the first time I have logged on to the board since 2003 (I have been a bit busy) and I'm getting ready to sell her after 10 years. If it matters, here are some specifics on the car: 1993 LX Convertible 5.0L SFI HO (stock) 49,711 miles Thanks! Last edited by 93LXJustForFun; 02-26-2007 at 01:01 AM..

03-06-2007, 04:48 AM	#2
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: EGR Valve for a '93 LX 5.0L HO "Feature Car" hey worst come to worst get a different spacer with a egr on it...ebay is cheap __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

03-06-2007, 07:52 AM	#3
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: EGR Valve for a '93 LX 5.0L HO "Feature Car" Have you tried your local Ford Dealer? If ANYONE can cross that part number, they can. If it was me, that'd be my next stop. __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

03-06-2007, 02:30 PM	#4
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: EGR Valve for a '93 LX 5.0L HO "Feature Car" hey try calling advanced auto if u havent already..they could cross parts for even my boat...there number is 585-865-2120 __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

03-06-2007, 09:07 PM	#5
93LXJustForFun Registered Member Join Date: Oct 1998 Posts: 4	Re: EGR Valve for a '93 LX 5.0L HO "Feature Car" Thanks for the replies. I ended up having to go through Ford. The problem is the old part number has been discontinued and is superseded by a new unit that also requires a new Position Sensor. Had to be ordered and is supposed to be in this Wednesday. Will end up costing me about $100 more than I cared to spend, but it is what it is. As long as the new part will fit in place of the old one, I will be good to go. Cheers....

03-11-2007, 10:27 PM	#6
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: EGR Valve for a '93 LX 5.0L HO "Feature Car" hey did u get that egr?how did it fit? __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What's the difference in "Progressive" vs "Specific" rate lowering springs?	NYC1	Windsor Power	6	03-19-2009 03:57 PM
"Chevy vs. Ford" should end, "V8's vs. Rice"	yelowjaket	Blue Oval Lounge	34	03-24-2003 04:34 AM
The Camshaft Spec "lobe Center" What Does It Mean As Far As "effect" On Performa	gtsr515	Windsor Power	6	06-12-2002 08:10 PM
Ever heard the song "Firestarter"? well now im "Firestopper"	5.0L_Of_Fury	Blue Oval Lounge	5	05-29-2002 05:01 PM
"8.8" Posi Rear End, 3.73's, Rebuilt, Have Reciepts $350" Sound Good?(Canadian Price)	BowTie Eater 5 Liter	Windsor Power	2	01-22-2002 12:42 AM