FMS A/C Elimintor kit?

88PONY · 11-08-2001, 10:14 AM

For those of you out there who have it, I no you can eliminate your A/C, but my question is can you eliminate your power steering pump as well? I know the March one you can, but my friend has one he is selling and he doesn't know either. Everyone around here has th March one, but I figure that they both got to serve the same purpose.

Thanks

------------------
88 Notch Natually aspirated 750 carb Edelbrock Victor Jr. Intake and heads 306/ATI C-4 4500 stall 4:10's 26x10.5 M/T MAC longtubes/prochamber Dynomax Race magnumss dumped, Caged and ready to go!!! 11.8@115

And remember friends don't let friend drive MOPARS!!!

Phantom5oh · 11-08-2001, 12:40 PM

yeah you can if you want to get rid of it... go to www.marchperf.com/pg30 check that out they will be able to help...

steve

------------------
Project Bird Turd

GNC Racing & Performance
Scarzi's Machine Works

88PONY · 11-08-2001, 02:16 PM

Thanks, but I need to know if you can do it with the Ford Motorsport kit. I know you can with the March kit, but as I said my friends got one he's not going to use.

Thanks Again

------------------
88 Notch Natually aspirated 750 carb Edelbrock Victor Jr. Intake and heads 306/ATI C-4 4500 stall 4:10's 26x10.5 M/T MAC longtubes/prochamber Dynomax Race magnumss dumped, Caged and ready to go!!! 11.8@115

And remember friends don't let friend drive MOPARS!!!

RED92LX50 · 11-09-2001, 11:34 AM

The FMS AC Delete kit is a Relocation kit for the Power Steering Pump. If you try to get rid of the Power steering Pump with the FMS bracket you won't have a Pulley for the belt to run over.

It is my understanding that if you want to get rid of the Power Steering and AC, you should use a bracket similar to the March kit - which includes a pulley attached to the bracket.

LX XLR8R · 11-09-2001, 01:28 PM

you dont need to spend any money to rid the power steering and a/c...i only have 3 pullies and the tensioner on my setup..i have alt, crank, waterpump..the tensioner i opened up and switched it around so it works backwards from what i had b4

if you can picture it this is how the belt is rounted(clockwise)..around the alternator->over the belt tensioner withc is putting right/upward(counterclockwise) pressure on it(it sits at a 6oclock position when tesnion is on)->left side of the water pump pully->right side of crank pully and wraps around back to the alt..belt should be about 42" long

can ya picture it..so bottom line dot by any POS march kits

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

11-08-2001, 10:14 AM	#1
88PONY Registered Member Join Date: Nov 2000 Location: INDIO CA USA Posts: 141	FMS A/C Elimintor kit? For those of you out there who have it, I no you can eliminate your A/C, but my question is can you eliminate your power steering pump as well? I know the March one you can, but my friend has one he is selling and he doesn't know either. Everyone around here has th March one, but I figure that they both got to serve the same purpose. Thanks ------------------ 88 Notch Natually aspirated 750 carb Edelbrock Victor Jr. Intake and heads 306/ATI C-4 4500 stall 4:10's 26x10.5 M/T MAC longtubes/prochamber Dynomax Race magnumss dumped, Caged and ready to go!!! 11.8@115 And remember friends don't let friend drive MOPARS!!!

11-08-2001, 12:40 PM	#2
Phantom5oh Registered Member Join Date: Mar 2000 Location: Boston, MA Posts: 334	yeah you can if you want to get rid of it... go to www.marchperf.com/pg30 check that out they will be able to help... steve ------------------ Project Bird Turd GNC Racing & Performance Scarzi's Machine Works

11-08-2001, 02:16 PM	#3
88PONY Registered Member Join Date: Nov 2000 Location: INDIO CA USA Posts: 141	Thanks, but I need to know if you can do it with the Ford Motorsport kit. I know you can with the March kit, but as I said my friends got one he's not going to use. Thanks Again ------------------ 88 Notch Natually aspirated 750 carb Edelbrock Victor Jr. Intake and heads 306/ATI C-4 4500 stall 4:10's 26x10.5 M/T MAC longtubes/prochamber Dynomax Race magnumss dumped, Caged and ready to go!!! 11.8@115 And remember friends don't let friend drive MOPARS!!!

11-09-2001, 11:34 AM	#4
RED92LX50 Registered Member Join Date: Aug 1999 Location: Fairfax, VA Posts: 220	The FMS AC Delete kit is a Relocation kit for the Power Steering Pump. If you try to get rid of the Power steering Pump with the FMS bracket you won't have a Pulley for the belt to run over. It is my understanding that if you want to get rid of the Power Steering and AC, you should use a bracket similar to the March kit - which includes a pulley attached to the bracket.

11-09-2001, 01:28 PM	#5
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	you dont need to spend any money to rid the power steering and a/c...i only have 3 pullies and the tensioner on my setup..i have alt, crank, waterpump..the tensioner i opened up and switched it around so it works backwards from what i had b4 if you can picture it this is how the belt is rounted(clockwise)..around the alternator->over the belt tensioner withc is putting right/upward(counterclockwise) pressure on it(it sits at a 6oclock position when tesnion is on)->left side of the water pump pully->right side of crank pully and wraps around back to the alt..belt should be about 42" long can ya picture it..so bottom line dot by any POS march kits ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch