How much HP might I be at?

5P0INT0 · 07-16-2002, 05:00 AM

I know this is probably the most common question asked, but I don't have access to a dyno test

I've got a 94 GT with underdrive pulleys, x pipe and cat back(bassani), 4.10 gears and a auburn diff?

And a fender cold air induction.

Sonics2042 · 07-16-2002, 04:24 PM

MAYBE 30-35 crank HP over stock. That's probably pretty generous... Gears don't add HP (FYI).

Thanks
DoranW

5P0INT0 · 07-16-2002, 08:29 PM

I think the next mod I need is a shift kit and a 2500 rpm torque converter. Those don't give me HP either. Is there something else I might want to add before I get the Torque converter and shift kit?

1BAD89 · 07-16-2002, 09:10 PM

My guess would be 191rwhp.

07-16-2002, 05:00 AM	#1
5P0INT0 Registered Member Join Date: Jan 2002 Location: Calgary Alberta Posts: 15	How much HP might I be at? I know this is probably the most common question asked, but I don't have access to a dyno test I've got a 94 GT with underdrive pulleys, x pipe and cat back(bassani), 4.10 gears and a auburn diff? And a fender cold air induction. __________________ 94 AOD GT 4.10 gears and Auburn posi, 3000 stall with a shift kit. Lower control arms, subframe connecters, Under drive pullies, Procharger running 9lbs of boost, 24lb inj, custom chip, Saleen rims running 295 on the rear, Bassani X pipe and Cat back.

07-16-2002, 04:24 PM	#2
Sonics2042 Registered Member Join Date: Jul 2001 Location: Seattle, WA Posts: 381	MAYBE 30-35 crank HP over stock. That's probably pretty generous... Gears don't add HP (FYI). Thanks DoranW __________________ What I have: 1990 Red Mustang 5.0 LX: [BBK X-Pipe]-[MAC Cat-Back Exhaust] [MAC Cold Air Intake]-[BBK Equal Shorties] [3.55 Gears]-[Cobra Intake Manifold (Upper and Lower] [E-303 Cam]-[Granetelli Mass Air Flow Sensor] [Front and rear sway bars]-[New black carpet and seats.] [Adjustable Fuel Regulator]-[T5 Conversion w/ K. Cobra Clutch/Hurst STS] [Cobra Throttle Body]-[130A Alt. Conversion] Thinking about: Aftermarket Heads! Vortech A-Trim

07-16-2002, 08:29 PM	#3
5P0INT0 Registered Member Join Date: Jan 2002 Location: Calgary Alberta Posts: 15	I think the next mod I need is a shift kit and a 2500 rpm torque converter. Those don't give me HP either. Is there something else I might want to add before I get the Torque converter and shift kit? __________________ 94 AOD GT 4.10 gears and Auburn posi, 3000 stall with a shift kit. Lower control arms, subframe connecters, Under drive pullies, Procharger running 9lbs of boost, 24lb inj, custom chip, Saleen rims running 295 on the rear, Bassani X pipe and Cat back.

07-16-2002, 09:10 PM	#4
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	My guess would be 191rwhp.