Ready for roller rockers

Scrapla · 01-02-2003, 06:16 PM

I wanna get a set of 1.6 roller rockers for my gt40-p heads but I have a question how can I tell which set I need cause theres some a 7/16" stud mount or a 3/8", how can I tell what they are on my heads? Also ive been lookin at Crane's for $229 a set does this sound like a fair price? Also I need a part # on some new rods cause since the heads are off I figured I replace them.

fiveohpatrol · 01-04-2003, 10:56 PM

the P heads are pedestal mount, you wont be able to use stud mount rockers unless you get the crane conversion kit for them.

I'd suggest getting a set of 1.6 pedestal mount roller rockers

-drew

Scrapla · 01-05-2003, 01:20 AM

Can someone tell me a good name brand on them 1.6 pedestal mount rr's ive been lookin at some cranes but not sure, someone have some part#'s maybe?

Scrapla · 01-05-2003, 09:00 AM

Ok its down to either Ford Motorsports or Crane, the cranes are actually like $10bucks cheaper.

BLACK85GT · 01-05-2003, 09:08 AM

I am looking at the Scorpions for mine. My local speed shop (Gearheadfx.com) has em for $239. They are really nice. I had the cranes before but these look much beefier. Here is a pic of them. http://www.ralphsmachine.com/roller_rockers.html

fiveohpatrol · 01-05-2003, 12:24 PM

well since my crane rockers are stamped with a ford oval, I'm guessing they are the same

01-02-2003, 06:16 PM	#1
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Ready for roller rockers I wanna get a set of 1.6 roller rockers for my gt40-p heads but I have a question how can I tell which set I need cause theres some a 7/16" stud mount or a 3/8", how can I tell what they are on my heads? Also ive been lookin at Crane's for $229 a set does this sound like a fair price? Also I need a part # on some new rods cause since the heads are off I figured I replace them. __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73 Last edited by Scrapla; 01-02-2003 at 06:24 PM..

01-04-2003, 10:56 PM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	the P heads are pedestal mount, you wont be able to use stud mount rockers unless you get the crane conversion kit for them. I'd suggest getting a set of 1.6 pedestal mount roller rockers -drew __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

01-05-2003, 01:20 AM	#3
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Can someone tell me a good name brand on them 1.6 pedestal mount rr's ive been lookin at some cranes but not sure, someone have some part#'s maybe? __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

01-05-2003, 09:00 AM	#4
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Ok its down to either Ford Motorsports or Crane, the cranes are actually like $10bucks cheaper. __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

01-05-2003, 09:08 AM	#5
BLACK85GT Registered Member Join Date: May 2002 Location: Tampa,FLORIDA Posts: 340	I am looking at the Scorpions for mine. My local speed shop (Gearheadfx.com) has em for $239. They are really nice. I had the cranes before but these look much beefier. Here is a pic of them. http://www.ralphsmachine.com/roller_rockers.html __________________ 5.0, Holley heads, 1.7 Scorp Rockers, Stealth intake, Holley 600 carb, Holley Mech. Fuel pump, MSD 6Digital, MSD distributor, Hotchkis upper/lower rear control arms, FMS B Springs, 3:73 (8.8) rear. Production # 9,377

01-05-2003, 12:24 PM	#6
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	well since my crane rockers are stamped with a ford oval, I'm guessing they are the same __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dont use 1.7 rockers with stock heads?	Coupe5oh	Windsor Power	10	11-28-2015 12:36 PM
Rail Rockers on 289 Small Block Heads	sleeperstang	Classic Mustangs	16	05-11-2003 11:34 PM
Roller Rockers, bad?	HiFlow5 0	Windsor Power	1	04-14-2002 01:35 PM
reg rockers or roller rockers??	Chevysucks	Windsor Power	1	12-05-2001 08:17 PM
Rockers and thermostat	SlowStang2	Windsor Power	1	08-09-2001 06:44 PM