Lets try to wake things up in here!!!!!!! - Page 2

Green92LX · 03-23-2001, 11:22 AM

Hey Shotgun, nobody thinks you're a dork. I asked for anything no matter how small. To make you feel better I got a REAL stupid one for you:

When I was in high school (a LONG TIME AGO), I had an 88 IROC (you could laugh, its OK)..it was a 305 5spd car with throttle body injection...for a 16 year old it was a dream compared to my parents cavalier. Anyway, the first thing I did was go to B&B performance and pick up my K&N, put it in right in the parking lot, and when I pulled out, I mashed it and actually thought the car was gonna fly or something!!!!!!! It just bogged up as usual and only chirped second when you power shifted.

Imagine that

------------------
1992 LX:V-1 S-Trim ,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Rollers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler
Daily driver 89 Coupe:BBK shorties,offroad,flowturds with dumps,soon to be cyber green

SmokeyDP · 03-23-2001, 12:22 PM

Has anyone heard a borla exhaust on a mustang? My friend has a 89 Trans am(lets not hold that against him) and when he put on borlas it gave a really mean deep sound, unlike the high pitched wine of flowmasters.

Scott

------------------
1992 GT 5.0L Convertible
BBK Shorties
Flowmasters
All Power
Super Chip

Green92LX · 03-23-2001, 12:25 PM

I'm not even gonna touch this one Smokey....

Oh the he!! with it. I have never heard anything that sounded good on those toilets, especially Borla.

As far as Mustangs go, I know an idiot that did that "let me cut the holes in my GT bumper thing" and ran those borla fart pipes out the @ss end...

Let me just tell you this kid has NO friends

------------------
1992 LX:V-1 S-Trim ,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Rollers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler
Daily driver 89 Coupe:BBK shorties,offroad,flowturds with dumps,soon to be cyber green

rj_stang · 03-23-2001, 12:34 PM

I think I would have to say swapping a 351W in place of a 3.8L. Not sure yet... I'm still finishing it up.

dinomite · 03-23-2001, 12:42 PM

Your putting a 351 in an sn95? Does that work?

rj_stang · 03-23-2001, 02:11 PM

Not an SN95 body... its a 86LX Fox body. It had a 3.8L and C-5 trans. The block is getting worked at the time so once I get everything figured out it will be on the street. Hopefully in the next 2-3 months.

BTW the Cobra R is a 351 in a SN95.

[This message has been edited by rj_stang (edited 03-23-2001).]

richs8750 · 03-23-2001, 03:05 PM

My favorite mod was a Dr.Gas X pipe, the sound is very different! There isnt a droning at midrange, just more power!

Five0 · 03-23-2001, 05:48 PM

What kind of mac's, where did you get them, and how much are they?

I think I might try them.

Are they louder than the flows or just deeper?

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

induction · 03-24-2001, 12:08 AM

My favorite mod ? Well thats easy , One summer day i went to the garage , looked at my ride an decided we both needed a change. so I simply opended the hood , removed the radiator cap then pushed the ol' dodge out the garage ,drove in the new stang re installed the cap. thats was the trick "a brand new outlook on life.

Blue Stallion · 03-24-2001, 12:22 AM

well, if i can save up enough money it would probably be a twin turbo kit! Then I could kick out enough hp to kill almost anything! LOL

BlackFly · 03-24-2001, 01:35 AM

Well, i did some head work to e7's , put on some long tubes , removed the cats and had the t-5 rebuilt all at once. It sounded great, pulled hard and blew my rebuilt t-5 to shreds. Try getting warranty on mustang tranny rebuild. Got different t-5, rebuilt it myself and it works slicker than when new. Now it's fun to drive .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
40 things you'll never hear a Southern boy say...	DAN-MAN	Blue Oval Lounge	16	11-24-2004 09:12 AM
Wake up America... We're now target #1...	Hammer	Blue Oval Lounge	12	02-17-2003 02:52 PM
What little things do I need for an A-Trim??	Stang_Crazy	Windsor Power	12	06-13-2002 10:43 PM
Things Car Guys should not Say LOUDLY at a Restraunt!	Mercury	Blue Oval Lounge	2	10-02-2001 04:41 PM
Tired of Life and Things going WRONG!!	Mercury	Blue Oval Lounge	20	07-06-2001 03:27 AM

03-23-2001, 11:22 AM	#21
Green92LX Registered Member Join Date: Jun 1999 Location: North Haven,CT Posts: 336	Hey Shotgun, nobody thinks you're a dork. I asked for anything no matter how small. To make you feel better I got a REAL stupid one for you: When I was in high school (a LONG TIME AGO), I had an 88 IROC (you could laugh, its OK)..it was a 305 5spd car with throttle body injection...for a 16 year old it was a dream compared to my parents cavalier. Anyway, the first thing I did was go to B&B performance and pick up my K&N, put it in right in the parking lot, and when I pulled out, I mashed it and actually thought the car was gonna fly or something!!!!!!! It just bogged up as usual and only chirped second when you power shifted. Imagine that ------------------ 1992 LX:V-1 S-Trim ,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Rollers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler Daily driver 89 Coupe:BBK shorties,offroad,flowturds with dumps,soon to be cyber green

03-23-2001, 12:22 PM	#22
SmokeyDP Registered Member Join Date: Jun 1999 Location: Middlesex, NJ Posts: 212	Has anyone heard a borla exhaust on a mustang? My friend has a 89 Trans am(lets not hold that against him) and when he put on borlas it gave a really mean deep sound, unlike the high pitched wine of flowmasters. Scott ------------------ 1992 GT 5.0L Convertible BBK Shorties Flowmasters All Power Super Chip

03-23-2001, 12:25 PM	#23
Green92LX Registered Member Join Date: Jun 1999 Location: North Haven,CT Posts: 336	I'm not even gonna touch this one Smokey.... Oh the he!! with it. I have never heard anything that sounded good on those toilets, especially Borla. As far as Mustangs go, I know an idiot that did that "let me cut the holes in my GT bumper thing" and ran those borla fart pipes out the @ss end... Let me just tell you this kid has NO friends ------------------ 1992 LX:V-1 S-Trim ,Edelbrock 6037 Heads,Cobra Intake,E-303,1.6 Rollers,65MM Holley TB, 75 MM Pro M Mass Air, 190 LPH FP,24 lb injectors,MSD 6A and BTM,BBK equal length shorties,offroad h-pipe,Mac Flowpath Mufflers,Pro 5.0, 3.73's,Motorsport "C" springs,welded subframe connectors,Ponies w/ 225/50 Nitto NT 450's on front,255/50 BFG Drags out back,93 Cobra Spoiler Daily driver 89 Coupe:BBK shorties,offroad,flowturds with dumps,soon to be cyber green

03-23-2001, 12:34 PM	#24
rj_stang Registered Member Join Date: Jan 2001 Location: Villa Park, IL Posts: 36	I think I would have to say swapping a 351W in place of a 3.8L. Not sure yet... I'm still finishing it up.

03-23-2001, 12:42 PM	#25
dinomite The Dude Join Date: Feb 2001 Location: Arlington, VA Posts: 1,262	Your putting a 351 in an sn95? Does that work?

03-23-2001, 02:11 PM	#26
rj_stang Registered Member Join Date: Jan 2001 Location: Villa Park, IL Posts: 36	Not an SN95 body... its a 86LX Fox body. It had a 3.8L and C-5 trans. The block is getting worked at the time so once I get everything figured out it will be on the street. Hopefully in the next 2-3 months. BTW the Cobra R is a 351 in a SN95. [This message has been edited by rj_stang (edited 03-23-2001).]

03-23-2001, 03:05 PM	#27
richs8750 Registered Member Join Date: Sep 2000 Location: germantown,maryland USA Posts: 47	My favorite mod was a Dr.Gas X pipe, the sound is very different! There isnt a droning at midrange, just more power!

03-23-2001, 05:48 PM	#28
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	What kind of mac's, where did you get them, and how much are they? I think I might try them. Are they louder than the flows or just deeper? ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft

03-24-2001, 12:08 AM	#29
induction The Brit! Join Date: Feb 2001 Location: Across the Pond! Posts: 694	My favorite mod ? Well thats easy , One summer day i went to the garage , looked at my ride an decided we both needed a change. so I simply opended the hood , removed the radiator cap then pushed the ol' dodge out the garage ,drove in the new stang re installed the cap. thats was the trick "a brand new outlook on life.

03-24-2001, 12:22 AM	#30
Blue Stallion Registered Member Join Date: Jun 1999 Location: palm bay, FL Posts: 63	well, if i can save up enough money it would probably be a twin turbo kit! Then I could kick out enough hp to kill almost anything! LOL

03-24-2001, 01:35 AM	#31
BlackFly Registered Member Join Date: Feb 2001 Location: winnipeg , manitoba , canada Posts: 83	Well, i did some head work to e7's , put on some long tubes , removed the cats and had the t-5 rebuilt all at once. It sounded great, pulled hard and blew my rebuilt t-5 to shreds. Try getting warranty on mustang tranny rebuild. Got different t-5, rebuilt it myself and it works slicker than when new. Now it's fun to drive .