exhaust ? 4 u all

tinner · 12-11-2001, 10:18 PM

i am getting exhaust put on my 65 fastback . the car will soon have a small block stroker motor that will put out around 400 to 450 hp. im going load mybe 1 or 2 chamber flows and a h pipe . my question is what size pipes do i go w/ ? the collector on my long tubes are 3"????????

p.s. has any one put single camber flow masters on there car will they even take 450 hp?????????

thanks,
tinner

cyberstang5.0 · 12-12-2001, 08:51 AM

DAMN, that is a lot of ponies!!!! Well, I think you will need to have to use 3" for your setup. If you go down to 2 1/2" it might even hurt you.

1BAD89 · 12-13-2001, 12:17 AM

I would run 3 inch pipe all the way from the collector. And I wouldn't get a one chamber, I'd get a 2 or 3.

12-11-2001, 10:18 PM	#1
tinner Registered Member Join Date: Nov 2001 Location: santa rosa ca. Posts: 121	exhaust ? 4 u all i am getting exhaust put on my 65 fastback . the car will soon have a small block stroker motor that will put out around 400 to 450 hp. im going load mybe 1 or 2 chamber flows and a h pipe . my question is what size pipes do i go w/ ? the collector on my long tubes are 3"???????? p.s. has any one put single camber flow masters on there car will they even take 450 hp????????? thanks, tinner

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cobra-R Side Exhaust -- SWEEET!	SkammyManX	Modular Madness	3	04-05-2003 11:58 AM
exhaust cross-overs??	Simi Stang	Windsor Power	7	12-09-2002 01:20 PM
Speed Secret # 4	jim_howard_pdx	Windsor Power	13	11-10-2002 03:42 PM
Speed Secret # 3	jim_howard_pdx	Windsor Power	13	11-09-2002 10:35 AM
Header gaskets	Stang951	Windsor Power	18	11-01-2002 05:57 PM

12-12-2001, 08:51 AM	#2
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	DAMN, that is a lot of ponies!!!! Well, I think you will need to have to use 3" for your setup. If you go down to 2 1/2" it might even hurt you.

12-13-2001, 12:17 AM	#3
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	I would run 3 inch pipe all the way from the collector. And I wouldn't get a one chamber, I'd get a 2 or 3.